We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black SATA power Y-splitter cables, 15-pin male to dual female, seven inches long

Aomoproing

Aomoproing SATA Power Y Splitter Cable 15 Pin Male to Dual Female 7 Inch 10 Pack

SKU CH-1K1T-7TTEE

Turns one SATA power connector into two, adding drives with 18 AWG cable at 7 inch length

Pack 10 packs

  • Add two SATA power ports from one connector
  • 7 inch length fits tight chassis routing
  • 18 AWG wire carries 3.3V 5V 12V
  • Connect SSD HDD DVD drive PCIe card
  • Ten cables in one pack for multiple builds

SATA Power Y Splitter Cable 10 Pack

The Aomoproing SATA Power Y Splitter Cable turns one 15-pin SATA power connector into two female ports. It is designed for system builders and upgraders who need extra power connections for additional drives or peripherals when the power supply lacks sufficient native SATA plugs. Each cable measures 7 inches and uses 18 AWG wire rated for 3.3V, 5V and 12V delivery. The pack contains ten splitters for multi-drive installations.

Upgrade from Limited Native SATA Ports

This splitter solves the common shortage of SATA power connectors on older or entry-level power supplies. The jump is worth it when adding a second SSD, a 3.5 inch hard drive or an optical drive without replacing the PSU. It also supports PCIe Express cards that draw auxiliary power through a SATA connector. Users must verify the power supply rating can handle the extra load before connecting multiple devices.

Tool-Free Installation With Clearance Check

Installation requires no tools: plug the male end into the PSU cable and attach drives to the two female ends. The short 7-inch length keeps cable routing tidy but demands that drives sit close to the power supply or existing cable run. The main risk is exceeding the PSU’s total wattage or rail limits when daisy-chaining several high-draw devices on a single connector.

Highlights

  • Add two SATA power ports from one connector
  • 7 inch length fits tight chassis routing
  • 18 AWG wire carries 3.3V 5V 12V
  • Connect SSD HDD DVD drive PCIe card
  • Ten cables in one pack for multiple builds

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 15-pin male connector fit a standard power supply SATA port?

Yes, the 15-pin male end plugs directly into any standard SATA power port on a desktop power supply.

Do I need tools to connect the 18 AWG splitter to my drives?

No tools are required; push each 15-pin female connector onto the drive until it clicks, ensuring the 3.3V, 5V and 12V lines seat fully.

When should I replace the 7-inch Y-cable in a 2.5-inch SSD or 3.5-inch HDD setup?

Replace the cable if the 18 AWG wires show insulation damage, the 15-pin connectors become loose, or voltage drops cause drive instability.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.