We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular copper SFP transceiver with RJ-45 port

AddOn

AddOn SFP-1GE-FE-E-T-AO server accessory 10/100/1000Base-TX RJ-45 100m

SKU CH-7P2W-72SMY MPN SFP-1GE-FE-E-T-AO

A hot-swappable SFP transceiver providing a 10/100/1000Base-T RJ-45 copper link up to 100 m for Gigabit Ethernet slots

  • TypeSFP (mini-GBIC)
  • Specifications1 x 10/100/1000Base-T LAN
  • Features1 x RJ-45 10/100/1000Base-T Network LAN
  • Juniper Networks SFP-1GE-FE-E-T compatible for seamless integration
  • Hot-swappable SFP transceiver enables quick installation without downtime
  • 10/100/1000Base-TX RJ-45 copper interface connects to existing cabling
  • Supports link distances up to 100 metres over copper
  • Factory-loaded OEM configuration data ensures identical performance to original transceivers

Copper SFP Transceiver for Gigabit Ethernet

This AddOn SFP module provides a 10/100/1000Base-TX copper interface with an RJ-45 connector. It is designed for network administrators who need to connect Gigabit Ethernet switches or routers over standard twisted-pair cabling up to 100 metres. The transceiver is factory programmed for Juniper Networks compatibility.

Replacing Fibre Modules with Copper Connectivity

Use this transceiver when existing fibre SFP ports must link to copper patch panels or end devices without media converters. The upgrade is worth it when cable runs stay within the 100 metre reach and the infrastructure uses Category 5e or better wiring. It avoids the cost and complexity of running new fibre optic cable.

Hot-Swappable Installation in SFP Slots

The module inserts directly into any standard SFP port without powering down the host equipment. Installation fails most often when the latch is not fully seated or when the port is configured for a different media type. Verify the switch recognises the copper link before closing the rack.

Highlights

  • Juniper Networks SFP-1GE-FE-E-T compatible for seamless integration
  • Hot-swappable SFP transceiver enables quick installation without downtime
  • 10/100/1000Base-TX RJ-45 copper interface connects to existing cabling
  • Supports link distances up to 100 metres over copper
  • Factory-loaded OEM configuration data ensures identical performance to original transceivers

Specifications

BrandAddOn - Network Upgrades
TypeSFP (mini-GBIC)
Specifications1 x 10/100/1000Base-T LAN
Features1 x RJ-45 10/100/1000Base-T Network LAN
Shipping weight0.16 kg
Package size121 × 70 × 30 mm

Questions about this item

What slot size and connector does this SFP transceiver require?

It uses the standard SFP form factor and plugs into a Gigabit Ethernet port with an RJ-45 connector for copper cabling.

How do I install the transceiver without interrupting the network?

The module is hot-swappable, so insert it into the powered-on switch or server slot until it clicks; the step often missed is waiting for the link LED to confirm the 10/100/1000Base-T negotiation.

When should I plan to replace the transceiver in a 100 m copper run?

Replace it if the port shows CRC errors, speed drops below 1000 Mbps, or the link fails to re-establish after a cable swap, as the optics and PHY degrade over time.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.