We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP+ transceiver module with silver metal housing, black LC duplex port, and gold edge connector visible

AddOn

AddOn FTLF8528P2BNV-AO 8G SFP+ 850nm 300m LC server accessory

SKU CH-KAJK-4G3QZ MPN FTLF8528P2BNV-AO

An SFP+ transceiver running 8-Gigabit Fibre Channel over 50/125 µm multi-mode fibre up to 300 m with an LC duplex connector, MSA-compliant and hot-swappable

  • TypeSFP+
  • Specifications1 x Fiber Channel
  • Features1 x LC Duplex Fiber Channel Network
  • Finisar-compatible SFP+ transceiver ensures OEM-level performance
  • 8 Gbps Fibre Channel speed supports high-throughput storage networks
  • 850 nm multi-mode optics reach 300 m over OM2 fiber
  • Hot-swappable LC duplex connector simplifies live maintenance
  • RoHS-compliant design meets environmental standards

8G SFP+ Transceiver for Optical Networks

The AddOn FTLF8528P2BNV-AO is an 8-Gigabit SFP+ transceiver designed for 8GBase-SW optical and data networks. It operates at 850nm over 50/125 µm multi-mode fiber with a reach of 300m. The module uses an LC duplex connector and a hot-swappable form factor for server and storage connectivity.

Hot-Swappable Installation and Compliance

Installation is a hot-swap action into any MSA-compliant SFP+ cage; no tools or host reboot are required. The unit is factory loaded with OEM-specific configuration data so it initialises identically to the original transceiver. Improper handling can contaminate the LC ferrules, and forcing the latch damages the cage spring.

Pre-Order Setup Checks

Verify that your switch or HBA port supports 8GBase-SW and accepts third-party MSA modules without firmware locks. Confirm the link will use 50/125 µm multi-mode cable with LC duplex patch cords and that the total channel length stays within 300m. Ensure the host SFP+ cage is clean and the port speed is configured for 8-Gigabit operation.

Highlights

  • Finisar-compatible SFP+ transceiver ensures OEM-level performance
  • 8 Gbps Fibre Channel speed supports high-throughput storage networks
  • 850 nm multi-mode optics reach 300 m over OM2 fiber
  • Hot-swappable LC duplex connector simplifies live maintenance
  • RoHS-compliant design meets environmental standards

Specifications

BrandAddOn - Network Upgrades
ModelFTLF8528P2BNV-AO
TypeSFP+
Specifications1 x Fiber Channel
Features1 x LC Duplex Fiber Channel Network
Shipping weight0.16 kg
Package size121 × 70 × 30 mm

Questions about this item

How do I verify the 850nm 300m link is working after installing the FTLF8528P2BNV-AO?

Check the switch or HBA port LEDs for a solid link light and confirm the interface reports 8GBase-SW speed with no CRC errors on the 50/125 µm multi-mode fiber run

What ships with the FTLF8528P2BNV-AO and what must I provide separately?

The transceiver itself ships ready to install; you must supply LC duplex patch cables and 50/125 µm multi-mode fiber cable plant

Which version of this transceiver should I choose for an 8GBase-SW multi-mode link?

The FTLF8528P2BNV-AO is the single 8G SFP+ variant built for 850nm multi-mode fiber up to 300m with an LC duplex interface

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.