We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow single-mode fibre patch cable with LC connectors, 15m length

AddOn

AddOn 15m LC OS1 Yellow Fibre Optic Cable

SKU CH-ER1N-WMESE

A 15 metre single-mode fibre patch cable with LC/UPC connectors for long-distance network links

  • TypeFiber Optic
  • ColorYellow
  • Length49.21 ft
  • Connector Number1
  • Connector Detail2 x LC Male Network
  • 15 m single-mode run links distant racks
  • Yellow jacket identifies OS1 cable at a glance
  • LC/UPC connectors give low-loss mating
  • Duplex design carries two fibres in one cord
  • 21 ft length suits standard cabinet spacing

15 metre single-mode fibre patch cable

This yellow OS1 cable is a 15 metre single-mode fibre patch lead terminated with two LC/UPC male connectors. It is built for long-distance data links between network switches, patch panels or transceivers. The 49.21 ft length suits campus or building-backbone runs where multimode reach is insufficient. The cable carries a single connector assembly joining both fibres.

Suited for single-mode backbone links

Installers who need a yellow OS1 duplex jumper for distances beyond multimode limits will find this length appropriate. It is not intended for short-range multimode connections, high-density MPO trunking or armoured outdoor deployments. Buyers requiring a different connector polish, jacket rating or fibre count should select an alternative cable.

Simple LC push-pull installation

The LC connectors use a standard push-pull latch that clicks into compatible SFP or patch-panel ports. No tools or polishing are required on site. The most common issue is confusing single-mode yellow cable with multimode orange or aqua cable, which causes link failure if mixed. Ensure both ends mate with single-mode transceivers and that the latch fully engages.

Highlights

  • 15 m single-mode run links distant racks
  • Yellow jacket identifies OS1 cable at a glance
  • LC/UPC connectors give low-loss mating
  • Duplex design carries two fibres in one cord
  • 21 ft length suits standard cabinet spacing

Specifications

BrandAddOn
TypeFiber Optic
ColorYellow
Length49.21 ft
Connector Number1
Connector Detail2 x LC Male Network

Questions about this item

Will this 15 m yellow OS1 patch cable connect directly to the LC ports on my existing single-mode transceivers?

Yes, the cable has two LC/UPC male connectors designed for standard single-mode LC ports.

If I keep older orange OM1 cables in the same rack, will this OS1 cable cause any interference or compatibility issues?

No, single-mode and multimode fibres operate on different core sizes and wavelengths; they do not interfere when routed together.

After installing the 15 m cable, how can I verify the link is working correctly?

Check that the link LEDs on both transceivers show solid green and run a ping or traffic test to confirm error-free connectivity.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.