A-Tech
A-Tech 32GB DDR3L 1333 ECC RDIMM 4Rx4 Server Memory
A 32 GB DDR3L 1333 registered ECC DIMM with 4Rx4 organisation and 1.35 V low-voltage operation for server upgrades
- Capacity32GB
- SpeedDDR3L 1333 (PC3L 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- 32 GB capacity expands server memory headroom
- DDR3L 1333 MHz speed matches PC3L-10600 spec
- ECC registered design protects data integrity
- 35 V low voltage reduces power draw
- 4Rx4 240-pin layout fits compatible Hynix slots
A-Tech 32GB DDR3L 1333 ECC RDIMM
This 32GB DDR3L module runs at 1333MHz with CL9 latency and 1.35V operation. It uses a registered 4Rx4 design with ECC for data integrity. The 240-pin DIMM fits server and workstation boards that support DDR3L registered memory. Major-brand chips provide consistent reliability.
Suits servers needing registered ECC DDR3L
This module suits administrators upgrading or repairing systems that require registered ECC DDR3L at 1333MHz. It is not for desktop boards that accept only unbuffered non-ECC memory. It is not for platforms limited to 1.5V DDR3 without low-voltage support. It is not for systems capped below 32GB per slot.
Deciding spec: registered 4Rx4 DDR3L 1333 ECC
The registered 4Rx4 organisation at DDR3L 1333 with ECC is the single specification that determines compatibility. The memory controller and BIOS must explicitly support registered 4Rx4 modules at this speed and voltage. Verify the platform's qualified-vendor list before purchase.
Highlights
- 32 GB capacity expands server memory headroom
- DDR3L 1333 MHz speed matches PC3L-10600 spec
- ECC registered design protects data integrity
- 35 V low voltage reduces power draw
- 4Rx4 240-pin layout fits compatible Hynix slots
Specifications
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Questions about this item
Will this 32 GB DDR3L 1333 registered ECC module run alongside my existing DDR3L 1333 RDIMMs in the same server?
Yes, it uses the same 1.35 V DDR3L 1333 specification and 240-pin RDIMM form factor, so it can be mixed with identical-speed registered ECC modules in supported slots.
How can I confirm the module is operating as ECC registered memory after installation?
Check the BIOS or system management interface — it should report 32 GB total, show the speed as 1333 MT/s, and indicate ECC registered mode active.
Does the box include only the 32 GB 240-pin RDIMM or are any cables or brackets supplied?
Only the single 32 GB DDR3L 1333 ECC RDIMM is included; no cables, brackets or additional hardware are provided.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite N262 014 BL Cat6a Shielded 10G Patch Cable 14ft Blue accessories barebone
Intel HNS2600KPF barebone pc 1U dual Xeon DDR4 512 GB
- Xeon
- Socket R3 (LGA2011-…



