2 Pack 3 Way Flat Wall Outlet Extender Adapter White Type A
A two-pack of 180-degree rotating flat plug adapters that turn one ungrounded outlet into three 10 A, 125–250 V AC sockets for lamps, chargers and small appliances
- Compatibility/FitmentAdhesives; Enamels; Epoxies
- Turn one wall socket into three outlets
- 180° rotatable plug fits behind furniture
- Pure copper conductors with flame-retardant ABS
- Rated 10 A at 125–250 V for 1250 W
- Compact two-pack suits home office or travel
2 Pack 3 Way Flat Wall Outlet Extender
This two-pack provides a pair of flat outlet extenders that turn each ungrounded indoor wall socket into three Type A receptacles. The compact design suits homes and offices where furniture sits close to the wall and standard plugs block adjacent outlets.
Check your wall socket type and load before ordering
Ensure the existing outlet is an indoor ungrounded Type A receptacle rated for up to 250 VAC. The adapter carries a maximum of 10 A and 1250 W total, so the combined draw of all connected devices must stay within that limit.
180 degree rotatable plug keeps profile low under
The flat plug rotates through 180 degrees to lie flush against the wall, preventing the assembly from protruding into walkways or furniture gaps. Pure copper conductors and flame-retardant ABS maintain a secure, cool connection even when the full 1250 W load runs continuously.
Highlights
- Turn one wall socket into three outlets
- 180° rotatable plug fits behind furniture
- Pure copper conductors with flame-retardant ABS
- Rated 10 A at 125–250 V for 1250 W
- Compact two-pack suits home office or travel
Specifications
| Compatibility/Fitment | Adhesives; Enamels; Epoxies |
|---|
Questions about this item
What comes in the package and do I need any extra parts?
You receive two white outlet extenders. Each unit provides three sockets from one wall plug and has a foldable 180-degree rotating flat prong. No additional components are required.
How do I decide between the two-pack and a single unit if both were offered?
The listing supplies exactly two extenders in one pack. If you need more than two locations, buy multiple packs; if you only need one location, the second extender can be kept as a spare or given away.
What does the 10-amp rating mean when I plug in a lamp, phone charger and printer together?
The total current drawn by all three devices on one extender must stay at or below 10 amps. At 125 volts that equals the listed 1250-watt maximum, and at 250 volts the same 10-amp limit applies.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Eaton AHCL1920FI 20 A 277/480 V 4-pole 4-wire 3-phase straight blade plug
- 1
- electrical plug



