Eaton
Eaton AH532C6W Straight Blade Plug 32A 4P5W Red Nylon Female
A 32 A, four-pole five-wire watertight connector rated IP67 and IP69K for 220/380 V to 240/415 V three-phase supplies
- Typehegft
- Item Count1
- Housing Typehegft
- 32 A three-phase power for heavy-duty equipment
- IP69K and IP67 ratings resist high-pressure wash-down
- Red nylon housing identifies 380–415 V circuits
- Nickel-plated brass contacts maintain conductivity
- Four-pole five-wire grounding ensures safe operation
Industrial power connector
The Eaton AH532C6W is a straight-blade plug rated 32 A for three-phase systems operating between 220/380 V and 240/415 V. It features a four-pole, five-wire grounding configuration with a red nylon housing and nickel-plated brass contacts. The device accepts #10-2 AWG conductors via back-wire termination.
Suited for IP69K wash-down environments
This connector serves installations requiring IP67 and IP69K ingress protection where high-pressure, high-temperature cleaning occurs. It is not intended for low-amperage control circuits, single-phase domestic supplies, or applications needing a male inlet rather than a female connector.
32 A three-phase rating is decisive
The 32 A, 220/380 V to 240/415 V rating determines compatibility with the supply and load. Verify that the circuit breaker, cable cross-section and phase configuration match these values before installation.
Highlights
- 32 A three-phase power for heavy-duty equipment
- IP69K and IP67 ratings resist high-pressure wash-down
- Red nylon housing identifies 380–415 V circuits
- Nickel-plated brass contacts maintain conductivity
- Four-pole five-wire grounding ensures safe operation
Specifications
| Type | hegft |
|---|---|
| Brand | Cooper Wiring Devices |
| Item Count | 1 |
| Housing Type | hegft |
Questions about this item
Should I pick the 32 A 4P5W version or a different amperage and pin count?
Choose the 32 A 4P5W variant when your three-phase circuit is rated for 32 amps and requires four poles plus a ground; other amperages or pin counts will not match this connector.
What does the 32 A rating mean once the plug is installed in a real machine?
It means the connector can continuously carry 32 amps per phase on a 220/380 V to 240/415 V three-phase supply without overheating, provided the cable is #10-2 AWG and correctly terminated.
What interface standard does the IP67 and IP69K rating cap in practice?
The IP67 and IP69K ratings certify the nylon housing against dust ingress and high-pressure water jets, but they do not limit the electrical standard; the connector remains rated for 32 A at 220/380 V–240/415 V.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Ideal 2011s Splice Connector For 2014 Bare Copper Pack 50
- Bare Copper
Bryant Locking Straight Blade Plug L6-20P 20A 250V 2.0HP Black/White 70620
- HAWA



