We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and white nylon L6-20P straight blade plug with ground monitoring

Legrand

Legrand L620PGCM straight blade plug 250V 20A

SKU CH-7W94-HC15P

A 250 V AC, 20 A straight-blade plug with ground-continuity monitoring and a nylon body that resists moisture and dust

  • ColorBlack/White
  • Ground continuity monitoring alerts you to wiring faults
  • 20 A 250 V rating suits high-power equipment
  • Nylon housing resists moisture dust and weather
  • Accepts cord diameters from .385 in to 1.150 in
  • L6-20P configuration ensures correct polarised connection

Ground-Monitoring Plug for 20 A Circuits

The Legrand L620PGCM is a straight-blade plug rated for 250 V AC and 20 A. It provides ground-continuity monitoring on a three-wire, two-pole L6-20P connection. The nylon housing resists moisture, dust and weather for industrial or workshop environments. Cord diameters from .385 in to 1.150 in are accepted.

Continuous Monitoring Under Load

The device checks ground integrity continuously while equipment is drawing current rather than only at start-up. Its non-shrouded, corrosion-resistant nylon body maintains the monitoring circuit through vibration and temperature cycling. No antimicrobial coating is applied.

L6-20P Configuration Decides Fit

The plug follows the L6-20P standard with two poles and three wires at 250 V AC. Buyers needing a different pole count, voltage rating or locking style cannot use this part. Verify the receptacle matches L6-20P before purchase.

Highlights

  • Ground continuity monitoring alerts you to wiring faults
  • 20 A 250 V rating suits high-power equipment
  • Nylon housing resists moisture dust and weather
  • Accepts cord diameters from .385 in to 1.150 in
  • L6-20P configuration ensures correct polarised connection

Specifications

BrandLEGRAND
ColorBlack/White

Questions about this item

Does the L620PGCM plug run hot or draw extra power when used continuously at 20 A?

The plug is rated for 20 A at 250 V AC and uses a nylon body that resists moisture and dust; it adds no active circuitry, so heat and power draw stay within normal limits for a passive connector.

What cord diameter do I need to fit the L620PGCM?

The plug accepts cord sizes from .385 in to 1.150 in outer diameter, so any three-wire cable within that range will seat correctly.

Will the L620PGCM work with my existing L6-20R receptacle?

Yes, the L6-20P blade configuration matches a standard L6-20R outlet, providing two poles plus ground at 250 V AC for single-phase equipment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.