We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black Mini SAS SFF-8087 cables, each 1.64 ft long, straight connectors on both ends

10Gtek

10Gtek Mini SAS SFF-8087 cable, 1.64 ft, 2 pack

SKU CH-20A8-9DJXJ

Internal SAS SFF-8087 cable pair, 1.64 ft each, 36-pin connectors, 100-ohm impedance, supports 6.0 Gbps data rates

  • TypeCable Connectors
  • ColorBlack
  • Length1.64 ft.
  • Connector Number2

Length 1.64 ft.

  • Supports 6.0 Gbps data rates for fast storage throughput
  • 100-Ohm impedance ensures reliable signal integrity
  • 64 ft length fits compact server chassis
  • Dual SFF-8087 36-pin connectors link controllers to backplanes
  • Two-cable pack simplifies multi-drive deployments

Internal 6 Gbps SAS link

These 10Gtek Mini SAS SFF-8087 cables connect two 36-pin internal ports at up to 6.0 Gbps. The 1.64 ft length suits server, workstation or desktop chassis where controllers, expanders or backplanes sit close together. Supplied as a two-pack for dual-link or redundant paths.

Check port type and clearance

Verify that both ends of your link use the 36-pin SFF-8087 internal connector. Confirm the 1.64 ft reach covers the routing distance inside your case without strain. The 100 Ohm impedance matches standard SAS signalling; no other interface is supported.

Fits tight internal routing

The short 1.64 ft assemblies reduce cable bulk between RAID cards, HBAs or backplanes. Each cable carries four lanes of SAS traffic, freeing larger legacy cables from the build. Two cables enable wide-port or failover configurations without extra part numbers.

Highlights

  • Supports 6.0 Gbps data rates for fast storage throughput
  • 100-Ohm impedance ensures reliable signal integrity
  • 64 ft length fits compact server chassis
  • Dual SFF-8087 36-pin connectors link controllers to backplanes
  • Two-cable pack simplifies multi-drive deployments

Specifications

Brand10Gtek
ModelMiniSAS SFF-8087
TypeCable Connectors
ColorBlack
Length1.64 ft.
Connector Number2

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the pack include two cables ready to connect a RAID card to a backplane, or do I need extra brackets?

The two-pack supplies two 1.64 ft cables, each with a 36-pin SFF-8087 connector on both ends, so they plug directly into compatible controllers and backplanes without extra parts.

Both cables are the same 1.64 ft length — when would I choose a different length?

Choose a longer cable only if the 0.5 m reach cannot span the distance between your controller and backplane inside the chassis.

The spec lists 6.0 Gbps — is that per lane or total bandwidth?

The 6.0 Gbps rating applies to each of the four lanes, giving up to 6.0 Gbps per lane across the 36-pin SFF-8087 link.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.