We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black internal Mini SAS SFF-8087 cables, 0.7 metre each

10Gtek

10Gtek Mini SAS SFF-8087 Cable 0.7m 2 Pack

SKU CH-KM22-XRKBR

Two 0.7 m SFF-8087 cables carry 6.0 Gbps SAS or SATA traffic inside servers and storage arrays

  • TypeCable Connectors
  • ColorBlack
  • Length2.46 ft.
  • Connector Number2

Length 2.46 ft.

  • 6 Gbps peak throughput for fast server storage links
  • 100-ohm impedance matching keeps signal integrity clean
  • 7 m length fits tight chassis routing
  • 36-pin SFF-8087 connectors plug straight into HBA and backplane
  • Two-cable pack simplifies dual-port or redundant builds

0.7 m SFF-8087 cable pair for servers

Two 10Gtek Mini SAS SFF-8087 cables connect internal storage controllers to backplanes or direct-attached enclosures. Each assembly uses a 36-position connector with sideband signals and is rated for up to 6.0 Gbps data rates. The 0.7-metre length suits compact server chassis and RAID systems.

100 Ohm impedance with thin low-skew construction

The AWG 30 cable maintains 100 Ohms impedance for signal integrity at 6 Gbps while reducing bulk inside the chassis. Operating temperature spans -20 to 80 °C and the assembly is RoHS compliant. Thin profile eases routing without blocking airflow to adjacent components.

Fits SAS and SATA HBA interfaces directly

Connectors plug into standard SFF-8087 ports on host bus adapters, RAID cards or motherboard headers without adapters. The pair frees a second port for additional arrays or redundant paths. No external power or active circuitry is required for operation.

Highlights

  • 6 Gbps peak throughput for fast server storage links
  • 100-ohm impedance matching keeps signal integrity clean
  • 7 m length fits tight chassis routing
  • 36-pin SFF-8087 connectors plug straight into HBA and backplane
  • Two-cable pack simplifies dual-port or redundant builds

Specifications

Brand10Gtek
ModelMiniSAS SFF-8087
TypeCable Connectors
ColorBlack
Length2.46 ft.
Connector Number2

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I route the 0.7-metre SFF-8087 cable inside a server chassis without bending it too sharply?

Keep the bend radius gentle — AWG 30 conductors and 100-ohm impedance tolerate moderate curves, but sharp kinks near the 36-pin connector can degrade the 6.0 Gbps signal.

When should I replace the cable if the RAID array starts reporting intermittent drive errors?

Swap it once reseating both SFF-8087 ends and verifying the HBA port does not clear the errors; the thin low-skew construction can fatigue after repeated thermal cycles between -20 and 80 °C.

What length limit applies if I need to extend the link beyond the supplied 0.7 metres while keeping 6.0 Gbps?

The specification lists custom lengths up to one metre; beyond that the 100-ohm impedance and skew budget typically cannot sustain the rated data rate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.