Zyvpee
Zyvpee WFB1212HE R00 F00 120mm 38mm 3-wire case fan
120 mm by 38 mm case fan with ball bearing and three-wire 12 V 0.6 A power
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Wires
- ColorBlack
- LEDNon-LED
- Dimensions120*38mm
- 120 mm frame fits standard case mounts
- 38 mm thickness delivers deeper airflow
- Ball bearing reduces friction for longer life
- Three-wire connector reports speed to the motherboard
- 12 V 0.6 A rating keeps power draw low
Zyvpee 120mm 38mm case fan
This Zyvpee case fan measures 120 by 38 millimetres and uses a three-wire power connector. It runs on 12 volts DC at 0.6 amps and uses a ball bearing for rotation. The black frame has no LED lighting.
Who this suits and who it does not
Builders needing a 120mm fan with 38mm thickness and a three-wire connection will find this unit matches those specifications. Buyers who require a thinner profile, a four-wire PWM connector or integrated lighting should look at other models.
Deciding specification: 38mm thickness
The 38 millimetre depth is the critical dimension that determines whether this fan fits your chassis or heatsink mounting points. Verify the available clearance before purchase.
Highlights
- 120 mm frame fits standard case mounts
- 38 mm thickness delivers deeper airflow
- Ball bearing reduces friction for longer life
- Three-wire connector reports speed to the motherboard
- 12 V 0.6 A rating keeps power draw low
Specifications
| Brand | 3ccooler.com |
|---|---|
| Series | WFB1212HE R00/F00 |
| Model | WFB1212HE |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Wires |
| Color | Black |
| LED | Non-LED |
| Dimensions | 120*38mm |
Questions about this item
What voltage and current does the 3-wire connector on the WFB1212HE draw?
The fan runs on 12 V DC and draws 0.6 A through its three-wire power connector.
Will the 38 mm thickness fit a standard 120 mm fan mount?
The frame measures 120 mm by 38 mm, so it only fits mounts that accept a 38 mm deep fan.
How is the ball-bearing fan secured, and what step is often missed?
Use four screws through the corner holes; the step people miss is checking clearance for the 38 mm depth before tightening.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



