We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80mm square case fan with 3-pin connector

Zyvpee

Zyvpee U80T24MUA7-53J241 80mm 24V 3-pin case fan

SKU CH-63G9-EN0N2

An 80 mm case fan with ball bearing, 2000-2499 RPM and 20-25 dBA noise at 24 V

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM2000-2499 RPM
  • Noise Level20 - 25 dBA
  • Power Connector3 Pin
  • Quiet cooling at 20-25 dBA low noise
  • 24 V DC power with 0.09 A draw
  • Ball bearing for long service life
  • 80 mm frame fits standard case mounts
  • 3-pin connector enables speed monitoring

Compact 24 V case fan for inverter

This 80 mm square frame fan runs on 24 V DC and draws 0.09 A through a standard three-pin connector. It is designed for enclosures, inverter units and other equipment that require a low-voltage cooling solution. The ball bearing and 2000–2499 RPM range suit continuous-duty environments.

Black 80×80×25 mm frame with three-pin power lead

The matte black housing measures 80 mm by 80 mm with a 25 mm thickness and carries no lighting. A three-wire lead terminates in a three-pin plug that supplies power and a tachometer signal for speed monitoring. Ball bearing construction reduces wear in long-running applications.

Quiet operation at 20–25 dBA with modest airflow

At full speed the fan produces between 20 and 25 dBA, keeping acoustic impact low in noise-sensitive racks. Power draw stays at 0.09 A on the 24 V rail, so thermal load on the supply is minimal. The DC square cooler design delivers steady airflow for inverter and case cooling tasks.

Highlights

  • Quiet cooling at 20-25 dBA low noise
  • 24 V DC power with 0.09 A draw
  • Ball bearing for long service life
  • 80 mm frame fits standard case mounts
  • 3-pin connector enables speed monitoring

Specifications

SeriesU80T24MUA7-53J241
ModelU80T24MUA7-53J241
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM2000-2499 RPM
Noise Level20 - 25 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*25mm

Questions about this item

What does the 3-pin DC connector limit for this 24 V fan?

The 3-pin connector supplies fixed 24 V DC at 0.09 A, so speed is set by voltage alone and cannot be adjusted through PWM signalling.

Will the 80 mm square frame with 25 mm thickness fit my case mount?

The fan measures 80 mm by 80 mm by 25 mm, matching standard 80 mm mounting holes used in most chassis and inverter enclosures.

How do I connect the three wires correctly on first install?

Match the three pins to the header — typically yellow for tachometer, red for 24 V supply, black for ground — and ensure the connector seats fully to avoid a missing RPM signal.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.