We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square centrifugal blower fan 105x98x36mm 3-pin connector

Zyvpee

Zyvpee SFF22D 105x98x36mm 12V .5A 3-pin blower case fan

SKU CH-XZN6-QKZA3

A 105 x 98 x 36 mm centrifugal blower fan running at 2000 to 2499 RPM and 30 to 35 dBA for compact case cooling

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size108mm
  • RPM2000-2499 RPM
  • Noise Level30 - 35 dBA
  • Power Connector3 Pin
  • Compact 105x98x36mm blower fits tight small-form-factor cases
  • Centrifugal design pushes air through restricted heatsink channels
  • 30-35 dBA operation keeps system noise low
  • 3-pin 12V .5A connector enables straightforward motherboard control
  • 2000-2499 RPM range delivers focused cooling airflow

Zyvpee SFF22D 108mm blower fan

The Zyvpee SFF22D is a 108mm centrifugal blower cooler measuring 105 by 98 by 36 millimetres. It runs on 12 volts DC at 0.5 amps and connects via a standard three-pin power header. The fan spins between 2000 and 2499 RPM while producing 30 to 35 dBA of noise. It has a black frame with no LED lighting.

Builders fitting small-form-factor cases

This blower suits builds that need directed exhaust through a narrow duct where a conventional axial fan cannot fit. Buyers who require PWM speed control, addressable lighting or a standard square mounting pattern should look at something else.

Three-pin DC voltage control

Speed is managed by varying the 12-volt supply on the three-pin connector; there is no fourth wire for PWM signalling. Check that your motherboard or fan controller supports DC mode before purchasing.

Highlights

  • Compact 105x98x36mm blower fits tight small-form-factor cases
  • Centrifugal design pushes air through restricted heatsink channels
  • 30-35 dBA operation keeps system noise low
  • 3-pin 12V .5A connector enables straightforward motherboard control
  • 2000-2499 RPM range delivers focused cooling airflow

Specifications

SeriesSFF22D
ModelSFF22D
TypeCase Fan
CompatibilityCase
Fan Size108mm
RPM2000-2499 RPM
Noise Level30 - 35 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Blower
Dimensions105*98*36mm

Questions about this item

Does the Zyvpee SFF22D blower fan include mounting screws or a power adapter in the box?

The fan ships as a single 105x98x36mm unit with a 3-pin connector; mounting screws and any 12V power adapter must be sourced separately.

How do I decide between the 2000 RPM and 2499 RPM ends of the range for my build?

The SFF22D runs between 2000 and 2499 RPM; choose the lower speed for quieter 30 dBA operation or the higher speed for maximum airflow in tight 108mm spaces.

What does the 30–35 dBA rating mean when the centrifugal blower is installed in a small-form-factor case?

At 30 dBA the fan is barely audible; at 35 dBA it is a soft whoosh — both levels stay low because the 12V .5A motor drives the 108mm impeller without high-pitched whine.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.