We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zyvpee R128015SL frameless 12V .19A case fan two-tone finish

Zyvpee

Zyvpee R128015SL 12V .19A frameless case fan

SKU CH-0NHW-5C6P3

A 12 V, 0.19 A frameless DC fan with a sleeve bearing and two-wire power for CPU cooler or VGA mounting

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeSleeve bearing
  • Power Connector2 wires
  • Color2-Tone
  • LEDNon-LED
  • 12 V .19 A low power draw for efficient cooling
  • Frameless design fits tight VGA and CPU cooler spaces
  • Four mounting holes give secure installation options
  • Sleeve bearing runs quietly in standard builds
  • Two-wire DC connection works with basic fan headers

Compact frameless DC fan for tight cooler builds

The Zyvpee R128015SL is a 12 V, 0.19 A frameless DC fan designed for CPU coolers and VGA coolers where a traditional frame will not fit. Its two-wire power connector supplies simple voltage control without PWM signalling. Builders working on low-profile or custom heatsinks can mount it directly to the cooler base using the four mounting holes.

Sleeve-bearing motor with four-hole mounting

A sleeve bearing keeps the motor running quietly at low speeds while the frameless body removes the bulk that blocks adjacent components or memory slots. The four mounting holes match common cooler screw patterns so the fan sits flush against fins or a cold plate. Because there is no frame, vibration transfers directly to the cooler; adding rubber grommets or isolation pads is advisable for silent operation.

Bare-fan package for DIY integration

The box contains only the fan itself with its two flying leads — no screws, adapters, RGB controllers or software utilities are included. You supply the mounting hardware and any voltage regulation or fan-curve configuration through the motherboard or a separate fan controller. This keeps the component cost low and lets experienced builders integrate the fan into existing cooler assemblies without surplus parts.

Highlights

  • 12 V .19 A low power draw for efficient cooling
  • Frameless design fits tight VGA and CPU cooler spaces
  • Four mounting holes give secure installation options
  • Sleeve bearing runs quietly in standard builds
  • Two-wire DC connection works with basic fan headers

Specifications

SeriesR128015SL
ModelR128015SL
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeSleeve bearing
Power Connector2 wires
Color2-Tone
LEDNon-LED
FeaturesDC frameless vga fan

Questions about this item

What voltage and current does the 2-wire connector on this Zyvpee R128015SL fan require?

The fan runs on 12 V and draws 0.19 A through its two-wire lead, so the header must supply at least that much current at 12 V.

What mounting-hole spacing does the frameless R128015SL need?

It uses four mounting holes; check your cooler or chassis for the matching hole pattern before fitting the fan.

How do you install the sleeve-bearing R128015SL, and what common mistake should be avoided?

Align the four holes, insert screws or pins evenly, and do not overtighten — sleeve bearings can bind if the frame is distorted.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.