We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 40 by 28 millimetre case fan with three-pin connector

Zyvpee

Zyvpee PSD1204PQBX-A 40x28mm 12V 8.4W 3-pin case fan

SKU CH-PYS6-STSEC

A 40 by 28 mm case fan with dual ball bearings and a 3 pin 12 V 8.4 W power connector

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • LEDNo
  • Dimensions40*28MM
  • Compact 40×28 mm footprint fits tight chassis
  • 2-ball bearing reduces wear for longer service life
  • 12 V 8.4 W draw keeps power budget low
  • 3-pin connector enables simple motherboard control
  • Black frame with no LED suits stealth builds

Compact 40x28mm 12V Server Fan

The Zyvpee PSD1204PQBX-A is a 40 by 28 millimetre case fan designed for 12 volt DC operation. It draws 8.4 watts and connects via a standard three-pin power header. Dual ball bearings support continuous running in tight server or industrial chassis.

Suited for Slim 1U and Embedded Builds

This fan fits 1U rack units, compact network appliances and custom enclosures where a 40 millimetre frame is the maximum height. The three-pin connector provides basic speed reporting but no PWM control, so builders who need automatic temperature curves should look at a four-pin alternative.

8.4 Watt Power Draw at 12 Volts

The 8.4 watt rating at 12 volts is the single figure that determines whether the fan matches your thermal budget and power-header capacity. Verify that your board can supply the required current before installing the PSD1204PQBX-A in the target system.

Highlights

  • Compact 40×28 mm footprint fits tight chassis
  • 2-ball bearing reduces wear for longer service life
  • 12 V 8.4 W draw keeps power budget low
  • 3-pin connector enables simple motherboard control
  • Black frame with no LED suits stealth builds

Specifications

BrandZyvpee
SeriesPSD1204PQBX-A
ModelPSD1204PQBX-A
TypeCase Fan
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNo
Dimensions40*28MM

Questions about this item

How do I mount the 40x28 mm 3-pin fan and what step do builders often miss?

Align the four corner holes with the chassis or heatsink brackets, insert the supplied screws through the fan frame first, then tighten into the mount; the step most often missed is checking that the 3-pin connector reaches the motherboard header without stretching the wires.

What maintenance will the dual-ball bearing 12 V 8.4 W fan need later?

The dual-ball bearing design is sealed for life, so no lubrication is required; if airflow drops, power off the system, remove the fan, and blow dust from the blades and frame with compressed air.

What limit appears first when the PSD1204PQBX-A runs continuously at full 12 V load?

The 8.4 W power draw sets the thermal ceiling; sustained operation at 12 V will hit the motor's rated temperature rise before any voltage or connector limit is reached.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.