We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 40mm square case fan, 10mm thick, two wires

Zyvpee

Zyvpee MW-410M12S 40mm 4010 12V 0.09A 2-pin case fan

SKU CH-XVJF-NTNEV

A 40 mm sleeve-bearing case fan running at up to 1600 RPM on 12 V with a 2-pin connector

  • TypeCPU Cooler Fan
  • Bearing Typesleeve bearing
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 40 × 10 mm frame fits tight chassis spaces
  • 12 V 0.09 A draw keeps power use low
  • 2-pin connector enables simple motherboard hookup
  • Sleeve bearing runs below 1600 RPM for quiet operation
  • Non-LED black design suits industrial and IPC builds

Compact 40 mm cooling fan

The Zyvpee MW-410M12S is a 40 x 10 mm case fan built for tight industrial control motherboards and IPC chassis. It draws 0.09 A at 12 V through a simple two-pin connector.

1600 RPM ceiling with sleeve bearing

At under 1600 RPM the fan moves modest airflow suited to low-heat embedded boards or auxiliary component cooling. The sleeve bearing keeps noise low but limits continuous high-temperature duty cycles.

Two-pin DC power for space-constrained builds

The 2-pin lead plugs directly into a 12 V header on industrial motherboards without PWM control. Its 4010 frame frees up room around dense I/O headers while providing basic active cooling.

Highlights

  • Compact 40 × 10 mm frame fits tight chassis spaces
  • 12 V 0.09 A draw keeps power use low
  • 2-pin connector enables simple motherboard hookup
  • Sleeve bearing runs below 1600 RPM for quiet operation
  • Non-LED black design suits industrial and IPC builds

Specifications

Brand3ccooler.com
SeriesMW-410M12S
ModelMW-410M12S
TypeCPU Cooler Fan
Bearing Typesleeve bearing
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
Dimensions40*10mm

Questions about this item

Will the 40 mm frame and 2-pin connector fit the same mounting holes and header on my older industrial motherboard?

The fan measures 40 by 10 mm and uses a standard 2-pin power connector, matching the common 4010 footprint found on many legacy IPC boards.

How can I confirm the MW-410M12S is spinning correctly once installed?

With 12 V applied the sleeve-bearing motor should run below 1600 RPM; you can verify rotation visually or by feeling airflow at the 40 mm exhaust.

Does the package include only the bare fan or are screws and a molex adapter also supplied?

The listing describes the MW-410M12S unit itself — 12 V, 0.09 A, two-wire, non-LED, black — so mounting screws and any connector adapters must be sourced separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.