We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60mm square case fan 25mm thick three wire white plug

Zyvpee

Zyvpee MMF-06G24TS-MM1 60mm 24V 0.11A case fan

SKU CH-BT70-2MAVT

60 mm 24 V case fan with 3-pin connector draws 0.11 A for compact cooling

  • TypeCase Fan
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Dimensions60*25mm
  • 24 V power suits industrial inverter builds
  • 60 × 60 × 25 mm frame fits standard 60 mm mounts
  • 11 A draw keeps converter load low
  • Three-wire plug enables speed monitoring
  • Non-LED black housing avoids light bleed

Compact 60 mm frame

The Zyvpee MMF-06G24TS-MM1 is a 60 by 25 mm case fan built for equipment that demands a 24 V supply. Its three-pin connector and 0.11 A draw suit industrial converters and tight chassis where standard 12 V units cannot be used. Buyers needing a 12 V or PWM-controlled fan should look elsewhere.

Steady airflow at fixed voltage

Because the motor runs directly from a 24 V rail without pulse-width modulation, rotational speed stays constant as long as the supply is stable. There is no low-speed idle mode, so acoustic output and airflow do not fluctuate during long operating periods.

Low current draw and simple wiring

At 0.11 A the fan adds only a modest load to a 24 V converter supply. The three-wire lead with a white plug carries power, ground and a tachometer signal for basic speed monitoring. No LED lighting or extra headers are present, keeping installation straightforward in space-constrained enclosures.

Highlights

  • 24 V power suits industrial inverter builds
  • 60 × 60 × 25 mm frame fits standard 60 mm mounts
  • 11 A draw keeps converter load low
  • Three-wire plug enables speed monitoring
  • Non-LED black housing avoids light bleed

Specifications

SeriesMMF-06G24TS-MM1
ModelMMF-06G24TS-MM1
TypeCase Fan
Power Connector3 Pin
ColorBlack
LEDNon-LED
Dimensions60*25mm

Questions about this item

How loud is the 60 mm 24 V fan when it runs continuously?

The 0.11 A draw at 24 V keeps heat output low, so the motor stays cool and noise remains modest during all-day operation.

What connector must my system provide for the three-wire white plug?

A standard 3-pin 24 V header is required; the fan has no PWM wire and no LED circuit.

Will the 60 × 25 mm frame fit the mounting holes on my older 60 mm chassis?

Yes — the 60 mm square footprint and 25 mm thickness match the legacy 60 mm fan pattern.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.