We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60mm square case fan with 25mm depth and three-pin connector

Zyvpee

Zyvpee MMF-06D24ES RC1 60mm 24V 0.1A 3-pin case fan

SKU CH-WT18-FXYVM

A 60 mm case fan with ball bearing, 24 V 0.1 A draw and a 3-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing for reliable long-term operation
  • 24 V 0.1 A low power draw suits inverter cooling
  • 60 mm by 25 mm compact frame fits tight chassis spaces
  • Three-pin connector enables simple motherboard control
  • Non-LED black design keeps builds clean and distraction-free

Compact 60 mm 24 V case fan

The Zyvpee MMF-06D24ES RC1 is a 60 mm square frame fan designed for 24 V systems. It draws 0.1 A through a standard three-pin connector. The ball bearing and black non-LED housing suit industrial or inverter cooling roles.

Airflow capacity and limits

At 60 by 25 mm the fan fits tight chassis slots and targeted component cooling. The 24 V 0.1 A rating defines its maximum output; it cannot scale beyond that voltage or current. Builders needing higher static pressure or larger frame sizes must look elsewhere.

Thermals noise and power draw

Ball bearing operation keeps running friction low during continuous 24 V use. The 0.1 A draw adds minimal load to the power rail. Acoustic output stays proportional to the small frame and fixed speed; no PWM control is present to reduce noise at idle.

Highlights

  • Ball bearing for reliable long-term operation
  • 24 V 0.1 A low power draw suits inverter cooling
  • 60 mm by 25 mm compact frame fits tight chassis spaces
  • Three-pin connector enables simple motherboard control
  • Non-LED black design keeps builds clean and distraction-free

Specifications

BrandZyvpee
SeriesMMF-06D24ES RC1
ModelMMF-06D24ES RC1
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions60 *25mm
Package Contentsrefer to title

Questions about this item

Will this 60mm 24V fan work alongside the older 60mm fans already in my case?

Yes, it uses a standard 60mm frame and a 3-pin connector, so it fits the same mounting holes and header as other 60mm case fans.

How can I verify the MMF-06D24ES RC1 is running correctly after installation?

Connect the 3-pin header, power the system, and confirm the ball-bearing fan spins smoothly without vibration or noise at 24V.

What comes in the box with the Zyvpee MMF-06D24ES RC1 and what must I buy separately?

The package includes the 60mm 24V 0.1A 3-pin fan only; mounting screws and any fan controller or adapter are not included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.