Zyvpee
Zyvpee MMF-06D24DS-RC7 60mm 24 V 0.09A 3 Pin case fan
60 mm 24 V case fan with three-pin connector for Yaskawa inverter cooling
- TypeCase Fan
- CompatibilityCase
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Dimensions60*25mm
- Compact 60 mm frame fits tight chassis spaces
- 24 V 0.09 A draw keeps power use low
- Three-pin connector enables speed monitoring
- 25 mm thickness suits standard mounting points
- Non-LED black design avoids unwanted light bleed
Industrial cooling fan
This Zyvpee case fan uses the MMF-06D24DS-RC7 series and fits a 60 by 25 mm mounting pattern. It runs on a 24 V supply and draws .09 A through a three wire power connector. The black frame has no integrated lighting.
Specialist builders and repair technicians
Technicians servicing YASKAWA inverter units or similar 24 V equipment can use this fan as a direct replacement. Buyers who need a fan for standard desktop motherboard headers should look elsewhere because the voltage requirement differs from typical PC cooling headers.
24 V operating voltage
The fan operates at 24 V with a .09 A current draw, which determines whether it matches the target power rail. Verify that the host device supplies this exact voltage before purchasing.
Highlights
- Compact 60 mm frame fits tight chassis spaces
- 24 V 0.09 A draw keeps power use low
- Three-pin connector enables speed monitoring
- 25 mm thickness suits standard mounting points
- Non-LED black design avoids unwanted light bleed
Specifications
| Series | MMF-06D24DS-RC7 |
|---|---|
| Model | MMF-06D24DS-RC7 |
| Type | Case Fan |
| Compatibility | Case |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Dimensions | 60*25mm |
Questions about this item
What does the 3‑pin connector on this 60 mm fan actually control?
The three‑pin header supplies 24 V power, ground and a tachometer signal so the motherboard or controller can monitor the 0.09 A motor speed.
Will the 60 mm by 25 mm frame fit my YASKAWA inverter enclosure?
The fan measures 60 mm square and 25 mm thick, matching the standard mounting holes used on many YASKAWA drive housings.
How do I wire the three leads without reversing polarity?
Connect the red wire to 24 V, black to ground and the yellow wire to the tach input; reversing red and black will prevent the fan from spinning.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



