We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black VGA cooling fan with two wire connector

Zyvpee

Zyvpee MGA5012HF-A10 12V 0.12A 2 Pin VGA Cooling

SKU CH-VWX6-DZJJ0

12V 0.12A two-wire fan cools graphics cards with a standard 2-pin power connector

  • TypeCPU Cooler Fan
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesVAG Cooling
  • 12 V 0.12 A power draw keeps the graphics card cool
  • Two-pin connector fits standard VGA fan headers
  • Black non-LED design suits low-profile builds
  • MGA5012HF-A10 series built for video-card airflow
  • New condition ensures reliable operation from first use

Zyvpee MGA5012HF-A10 12V VGA Cooler

This Zyvpee MGA5012HF-A10 is a 12V 0.12A 2 pin video fan designed for VGA cooling tasks. It suits builders fitting a replacement cooler onto a graphics card or similar component. The non-LED black unit arrives in new condition ready for installation. Buyers who need a 3 pin or 4 pin PWM connector for motherboard control cannot use this model.

Two pin 12V 0.12A power connector

The single specification that decides fitment is the 2 pin power connector drawing 12V at 0.12A. This interface determines whether the fan plugs directly into the graphics card header or an adapter cable. No other voltage or current rating is offered for this series. Systems requiring a different pin count or amperage must select another cooler.

Sustained airflow at fixed 12V speed

Under sustained load the fan runs at a constant 12V 0.12A rate because the 2 pin design lacks PWM signalling. Rotational speed therefore stays steady rather than ramping with temperature. This behaviour suits scenarios where a fixed airflow is preferred over automatic curves. Builds that rely on motherboard fan curves for quiet idle operation will not get that feature here.

Highlights

  • 12 V 0.12 A power draw keeps the graphics card cool
  • Two-pin connector fits standard VGA fan headers
  • Black non-LED design suits low-profile builds
  • MGA5012HF-A10 series built for video-card airflow
  • New condition ensures reliable operation from first use

Specifications

Brandzyvpee
SeriesMGA5012HF-A10
ModelMGA5012HF-A10
TypeCPU Cooler Fan
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesVAG Cooling

Questions about this item

What does the 12 V, 0.12 A rating mean once the fan is running in my case?

It draws twelve volts at point one two amps, so the fan runs on standard 12 V motherboard or controller headers without extra adapters.

What does the 2-pin power connector limit in practice?

The two-wire lead provides power only, so speed is fixed at full voltage and cannot be regulated by PWM or voltage control.

What do I need to check so the MGA5012HF-A10 fits my graphics card cooler?

Verify the mounting hole spacing and shroud clearance on your VGA cooler match the fan frame shown in the photos before ordering.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.