We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60mm square case fan 15mm thick 3-pin connector

Zyvpee

Zyvpee M60R24MGAB 53J56 60x15mm 24V 0.08A 3-pin case fan

SKU CH-FRQ2-DTFD3

A 60 mm case fan with ball bearing, 24 V 0.08 A three-pin power and 15 mm thickness for DcP 1519 1819 printer power supplies

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 60×15 mm footprint fits tight chassis spaces
  • Ball bearing ensures durable, low-friction operation
  • 24 V DC at 0.08 A draws minimal power
  • 3-pin connector enables straightforward motherboard control
  • Designed for DcP 1519 and 1819 printer power supplies

Compact 60 mm DC fan for targeted cooling

The Zyvpee M60R24MGAB 53J56 is a 60 by 15 mm case fan that runs on 24 V DC at 0.08 A through a three-pin connector. It is built for builders who need a slim, low-current airflow source in tight chassis spaces or for direct replacement in DcP 1519 and 1819 printer power units.

Ball-bearing motor keeps thermals steady

The ball bearing design provides consistent rotation and predictable heat dissipation during continuous operation. Power draw stays at 0.08 A on the 24 V rail, so the fan adds negligible load to the supply while maintaining airflow across hot components.

Three-pin lead and square frame simplify

The 3-pin power connector plugs directly into compatible headers without adapters. The DC square cooler frame matches the mounting pattern of the original printer units, so no bracket modifications or extra wiring are required for a drop-in fit.

Highlights

  • Compact 60×15 mm footprint fits tight chassis spaces
  • Ball bearing ensures durable, low-friction operation
  • 24 V DC at 0.08 A draws minimal power
  • 3-pin connector enables straightforward motherboard control
  • Designed for DcP 1519 and 1819 printer power supplies

Specifications

SeriesM60R24MGAB
ModelM60R24MGAB
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*15mm

Questions about this item

How do I install the 3-pin connector on this 60x15mm fan and what step is often missed?

Align the three pins with the motherboard or controller header, press straight down until fully seated, and verify the fan spins at 24V; the step often missed is confirming the keyed orientation so the signal wire matches the board pinout.

What maintenance will the ball bearing in this M60R24MGAB require over time?

The ball bearing is sealed and needs no lubrication; if noise or vibration appears after extended 24V 0.08A operation, replace the entire 60x15mm unit rather than attempting bearing service.

At what point does the 24V 0.08A power limit become the bottleneck during continuous running?

The 0.08A draw at 24V is the fixed electrical ceiling; sustained load cannot exceed this input, so airflow is capped by the motor's rated power rather than thermal throttling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.