We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60 by 60 by 15 mm axial case fan with maglev bearing and two wires

Zyvpee

Zyvpee KDE1206PHV2 MS.A.GN 12V 1.0W 60x15mm 2 Pin case fan

SKU CH-MVVQ-G1NKK

60×15 mm maglev axial fan runs on 12 V and draws 1.0 W through a 2-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeMaglev
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for longer life
  • 12 V 1.0 W draws minimal power from the PSU
  • 60 × 60 × 15 mm fits tight 60 mm mounting points
  • Two-pin connector plugs straight into standard headers
  • Non-LED black frame keeps the build clean and distraction-free

Compact 60 mm axial fan

The Zyvpee KDE1206PHV2 is a 60 mm by 15 mm DC axial fan rated at 12 V and 1.0 W. It suits builders who need a small-footprint cooler for tight chassis spaces or targeted component airflow.

Two-pin power and maglev bearing

A two-pin connector plugs directly into a 12 V header on the motherboard or a fan controller. The maglev bearing reduces friction without requiring a larger frame, freeing adjacent mounting points for other hardware.

Steady low-power operation

At 1.0 W draw the motor maintains consistent rotation during extended sessions rather than spiking on startup. The non-LED black frame adds no extra heat load, making it suitable for continuous duty in compact builds.

Highlights

  • Maglev bearing reduces friction for longer life
  • 12 V 1.0 W draws minimal power from the PSU
  • 60 × 60 × 15 mm fits tight 60 mm mounting points
  • Two-pin connector plugs straight into standard headers
  • Non-LED black frame keeps the build clean and distraction-free

Specifications

SeriesKDE1206PHV2
ModelKDE1206PHV2
TypeCase Fan
CompatibilityCase
Bearing TypeMaglev
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions60*60*15mm

Questions about this item

What is the power draw of the 12 V 1.0 W Maglev fan under continuous load?

The fan is rated at 1.0 W on a 12 V supply, so sustained power draw stays at that level.

How much heat does the 60x15 mm Maglev bearing generate during all-day use?

With only 1.0 W of electrical input, the motor adds very little heat to the case interior.

Does the 2-pin connector require a specific header or adapter to run?

It plugs directly into any standard 2-pin or 3-pin 12 V fan header on the motherboard.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.