We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black square 12V DC case fan 50x15mm two pin maglev bearing no LED

Zyvpee

Zyvpee KDE1205PHV4 50x15mm 12V .7W 2-pin case fan

SKU CH-S04E-SMFTW

A 50 by 15 millimetre Maglev case fan running on 12 volts at .7 watts with a 2-pin connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quieter operation
  • 12 V DC power draws only .7 W for efficient cooling
  • Compact 50 x 50 x 15 mm frame fits tight CPU cooler spaces
  • Simple 2-pin connector enables quick installation
  • Black non-LED design suits clean, professional builds

Compact 50 mm Maglev cooler

The Zyvpee KDE1205PHV4 is a 50 by 50 by 15 millimetre case fan designed for CPU cooler mounting. It runs on a 12 volt supply and draws .7 watts through a two pin power connector. The maglev bearing and non LED black frame suit builders who need a small footprint cooler without lighting. Buyers who want a larger diameter fan or integrated RGB illumination should look elsewhere.

Sustained airflow with maglev bearing

Under continuous load the maglev bearing reduces friction so the motor maintains steady rotation without the wear seen in sleeve designs. The DC square frame directs air through tight heatsink channels rather than dispersing it broadly. Low power draw of .7 watts keeps heat output minimal during long sessions. This fan is not intended for high static pressure radiators or multi fan arrays.

Two pin voltage control limits

The two pin connector supplies fixed 12 volt power so speed varies only with voltage changes from the header. No PWM signal means the motherboard cannot command precise duty cycles or zero RPM stops. Builders who need software fan curves or automatic idle shutdown cannot use this header type. The interface suits simple constant speed cooling or manual voltage adapters.

Highlights

  • Maglev bearing reduces friction for quieter operation
  • 12 V DC power draws only .7 W for efficient cooling
  • Compact 50 x 50 x 15 mm frame fits tight CPU cooler spaces
  • Simple 2-pin connector enables quick installation
  • Black non-LED design suits clean, professional builds

Specifications

SeriesKDE1205PHV4
ModelKDE1205PHV4
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions50*50*15mm

Questions about this item

How much power does the 12 V 0.7 W fan draw when running continuously?

The fan is rated at 0.7 W on a 12 V supply, so continuous operation draws that amount.

What connector must my motherboard or controller provide for the 2-pin plug?

A standard two-pin 12 V header is required; the fan has no PWM or tachometer wire.

Will the 50 mm maglev unit fit the mounting holes on my older 50 mm CPU cooler?

Yes — the 50 × 50 × 15 mm frame matches the common 50 mm square mounting pattern.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.