We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80 by 25 mm case fan with maglev bearing and two-wire connector

Zyvpee

Zyvpee KD1208PTS1 8025 12V 2.6W 80mm case fan

SKU CH-JZJX-RXMCP

An 80 mm maglev case fan running on 12 V at 2.6 W with a two-wire power connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeMaglev
  • Power Connector2 Wires
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quiet operation
  • 12 V 2.6 W power draw keeps energy use low
  • 80 x 25 mm size fits standard 8025 mounting holes
  • Two-wire connector simplifies installation in any case
  • Non-LED black finish suits clean, distraction-free builds

Zyvpee KD1208PTS1 80 mm case fan

The Zyvpee KD1208PTS1 is an 80 mm by 25 mm case fan that runs on 12 V and draws 2.6 W. It uses a maglev bearing and a two-wire power connector in a black frame with no lighting. This component is built for standard case cooling slots.

Suits builders with an 80 mm mount

The fan fits an 80 mm cut-out and connects directly to a two-pin header. It will not work with a four-pin PWM header, so systems that require speed reporting or automatic curves need a different solution. Buyers who need variable speed control should look elsewhere.

Maglev bearing with two-wire fixed voltage

The maglev bearing reduces friction and noise while the two-wire design means the fan runs at a constant 12 V. This single characteristic determines whether the fan matches the motherboard header and the cooling profile you require.

Highlights

  • Maglev bearing reduces friction for quiet operation
  • 12 V 2.6 W power draw keeps energy use low
  • 80 x 25 mm size fits standard 8025 mounting holes
  • Two-wire connector simplifies installation in any case
  • Non-LED black finish suits clean, distraction-free builds

Specifications

SeriesKD1208PTS1
ModelKD1208PTS1
TypeCase Fan
CompatibilityCase
Bearing TypeMaglev
Power Connector2 Wires
ColorBlack
LEDNon-LED
Dimensions80*25mm

Questions about this item

Which 80mm maglev fan version matches the KD1208PTS1 series?

The KD1208PTS1 series is a single 80mm by 25mm maglev case fan with a 2‑wire power connector and no LED lighting.

What does the 2.6 W rating mean when the fan is running in a case?

At 12 V the fan draws 2.6 W, so it adds minimal load to the power supply while delivering airflow for an 80mm mount.

How does the 2‑wire connector limit speed control?

A 2‑wire connector supplies constant 12 V power without a PWM or tach signal, so the fan runs at full speed and cannot be regulated by the motherboard.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.