We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tiny black 25 mm square Meglev fan with two wires

Zyvpee

Zyvpee KD0502PEV1-8 25mm 5V case fan

SKU CH-QFYJ-TCPGW MPN KD0502PEV1-8

Compact 25 mm 5 V Meglev fan spins below 1600 RPM with a two-wire connector

  • TypeCPU Cooler Fan
  • Fan Size25mm
  • Bearing TypeMeglev
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • Ultra-slim 25 mm profile fits tight notebook spaces
  • Meglev bearing runs below 1600 RPM for quiet operation
  • Low 0.8 W draw at 5 V saves battery life
  • Simple 2-wire 3-pin connector enables quick installation
  • Non-LED black design keeps builds clean and distraction-free

Compact 5 V slim fan

The Zyvpee KD0502PEV1-8 is a 25 mm square, 6 mm thick case fan that runs on 5 V DC and draws 0.8 W. Its two-wire, three-pin connector suits notebook-style headers and tight internal layouts. The black, non-LED frame keeps the visual profile neutral for any build.

Meglev bearing and low profile

A Meglev bearing reduces mechanical contact, helping the fan stay quiet while spinning up to 1600 RPM. The 25 × 25 × 6 mm footprint fits slim chassis, mini-ITX boards and laptop-style coolers where standard 25 mm fans are too tall. Two-pin power means speed is voltage-controlled rather than PWM-regulated.

Replaces thicker 5 V axial fans

Swapping a taller 5 V axial fan for this 6 mm unit recovers clearance for memory modules, VRM heatsinks or cable routing. The upgrade is worthwhile when the original fan vibrates, whines or no longer spins freely and the header supplies 5 V on two pins. Builders needing PWM control or higher static pressure should look elsewhere.

Highlights

  • Ultra-slim 25 mm profile fits tight notebook spaces
  • Meglev bearing runs below 1600 RPM for quiet operation
  • Low 0.8 W draw at 5 V saves battery life
  • Simple 2-wire 3-pin connector enables quick installation
  • Non-LED black design keeps builds clean and distraction-free

Specifications

BrandZyvpee
SeriesKD0502PEV1-8
ModelKD0502PEV1-8 MS.N
TypeCPU Cooler Fan
Fan Size25mm
Bearing TypeMeglev
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesMini Cooling
Dimensions25*06MM

Questions about this item

What does the 5 V two-wire connector limit in practice?

The 5 V two-wire connector supplies power only, so speed is fixed at the rated level and cannot be adjusted by the motherboard.

What clearance does the 25 mm square by 6 mm thick frame require?

The fan needs a 25 mm by 25 mm mounting area with at least 6 mm of vertical clearance for the frame.

How is the Meglev bearing fan installed, and what step is often missed?

Connect the two power wires to a 5 V header, secure the 25 mm frame with screws, and verify the airflow direction arrows point the right way.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.