Zyvpee
Zyvpee HA60151V4-D020-C99 60x15mm 12V 3-pin case fan
A 60 by 15 millimetre case fan with a maglev bearing runs on twelve volts and draws point six watts through a three-pin connector
- TypeCPU Cooler Fan
- Bearing TypeMaglev
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Dimensions60*15mm
- Maglev bearing reduces friction for quieter operation
- 60×15 mm frame fits tight 6015 mounting spaces
- 12 V 0.6 W draw keeps power use low
- Three-pin connector enables direct motherboard control
- Non-LED black design suits understated builds
60 mm maglev case fan
This 60 mm by 15 mm fan uses a maglev bearing and a three‑pin connector to deliver quiet airflow for compact chassis or projector cooling. It runs on 12 V power and draws only .6 W, making it suitable for low‑noise builds where space is limited. The black, non‑LED frame keeps the appearance understated.
Maglev bearing and three‑pin power
The maglev design reduces friction for longer life and quieter operation compared with traditional sleeve or ball bearings. A standard three‑pin connector supplies power and tachometer feedback, so the motherboard or fan controller can monitor speed without PWM control. The slim 15 mm profile fits tight clearances around small heatsinks or projector housings.
Check mounting holes and voltage
Verify that your case or heatsink has 60 mm mounting holes and can accommodate a 15 mm thick frame before ordering. Ensure the system provides a 12 V three‑pin header; the fan will not run from a 5 V or four‑pin PWM header without an adapter. Buyers needing higher airflow, RGB lighting or PWM speed control should look elsewhere.
Highlights
- Maglev bearing reduces friction for quieter operation
- 60×15 mm frame fits tight 6015 mounting spaces
- 12 V 0.6 W draw keeps power use low
- Three-pin connector enables direct motherboard control
- Non-LED black design suits understated builds
Specifications
| Brand | 3ccooler.com |
|---|---|
| Series | HA60151V4-D020-C99 |
| Model | HA60151V4-D020-C99 |
| Type | CPU Cooler Fan |
| Bearing Type | Maglev |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Dimensions | 60*15mm |
Questions about this item
What 3-pin connector standard does the HA60151V4-D020-C99 use and what voltage does it run on?
The fan uses a standard 3-pin DC connector and operates at 12V.
What are the exact mounting dimensions for the HA60151V4-D020-C99?
The frame measures 60x60mm with a 15mm thickness and uses standard 60mm mounting holes.
How is the HA60151V4-D020-C99 installed and which wire is often misidentified?
Mount the fan with four screws, then plug the 3-pin header into the motherboard; the yellow wire is the tachometer signal, not a second power lead.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114365BTC
In stock
