We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 40mm square Maglev case fan, 20mm thick, non-LED, three-pin connector

Zyvpee

Zyvpee HA40201V4-0000-C99 40mm 12V Maglev case fan

SKU CH-2RA7-0CPBE

A 40mm Maglev case fan moving air at 12V and 0.6W with a 3-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeMeglev
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.6 W power draw keeps energy use low
  • 40 mm by 20 mm size fits tight case spaces
  • Three-pin connector enables straightforward motherboard control
  • Non-LED black design suits understated builds

Compact 40 mm case fan

The Zyvpee HA40201V4-0000-C99 is a 40 mm by 20 mm case fan designed for tight chassis spaces. It runs on 12 V and draws 0.6 W through a standard three-pin power connector. The black frame carries no LED lighting. A maglev bearing keeps acoustic output low during continuous operation.

Builders fitting small-form-factor or legacy cases

This unit suits builds where a 4020 form factor is the only mounting option, such as compact industrial enclosures or older proprietary systems. Buyers who need higher airflow, PWM speed control or RGB illumination should look elsewhere, as the fan provides fixed-speed operation and no lighting features.

Low-power cooling for restricted clearances

At 0.6 W the fan adds minimal load to a 12 V rail while delivering targeted airflow across VRM heatsinks or drive cages. It handles spot-cooling duties in confined layouts but lacks the static pressure and volume to serve as primary chassis exhaust in larger enclosures.

Highlights

  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.6 W power draw keeps energy use low
  • 40 mm by 20 mm size fits tight case spaces
  • Three-pin connector enables straightforward motherboard control
  • Non-LED black design suits understated builds

Specifications

SeriesHA40201V4-0000-C99
ModelHA40201V4-0000-C99
TypeCase Fan
CompatibilityCase
Bearing TypeMeglev
Power Connector3 Pin
ColorBlack
LEDNon-LED
Dimensions40mm*20mm

Questions about this item

What power connector does the HA40201V4-0000-C99 need on the motherboard?

The HA40201V4-0000-C99 uses a 3 Pin connector, so the motherboard or fan controller must provide a matching 3 Pin header.

Will the 40mm Maglev fan fit the same mounting holes as a standard 4020 fan?

Yes, the 40mm by 20mm frame matches the 4020 form factor, so existing 4020 mounting points in the case will align.

How can I confirm the fan is spinning correctly after installation?

Connect the 3 Pin cable, power on the system, and verify the blades rotate smoothly and quietly at 12V without vibration.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.