We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black square 30mm maglev CPU cooler fan, 10mm thick, two-wire non-LED design

Zyvpee

Zyvpee HA30101V3-000C-A99 30mm Maglev CPU cooler fan

SKU CH-V6A2-D278D

A 30 mm maglev CPU cooler fan running at 12 V with 0.44 W draw and 15–20 dBA noise

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Fan Size30mm
  • Bearing TypeMaglev
  • Air Flow1-5 CFM
  • Noise Level15 - 20 dBA
  • Ultra-quiet operation at 15-20 dBA noise level
  • Maglev bearing ensures long-lasting smooth rotation
  • Low 0.44W power draw at 12V DC
  • Compact 30x10mm size fits tight CPU coolers
  • Simple two-wire connection for easy installation

Compact CPU cooler fan

The Zyvpee HA30101V3-000C-A99 is a 30 mm maglev fan built for tight CPU cooler mounts. It suits builders replacing a failed stock fan on a low-profile heatsink where height clearance is critical.

12 V two-wire power

The fan runs on DC 12 V and draws 0.44 W through a simple two-wire STB connector. That single voltage and connector combination decides whether the unit will plug straight into your cooler’s existing header.

Maglev bearing silence

Maglev bearing construction keeps acoustic output between 15 and 20 dBA while moving 1 to 5 CFM of air. The non-LED black frame adds no light spill, so the cooler stays visually neutral inside the case.

Highlights

  • Ultra-quiet operation at 15-20 dBA noise level
  • Maglev bearing ensures long-lasting smooth rotation
  • Low 0.44W power draw at 12V DC
  • Compact 30x10mm size fits tight CPU coolers
  • Simple two-wire connection for easy installation

Specifications

SeriesHA30101V3-000C-A99
ModelHA30101V3-000C-A99
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Fan Size30mm
Bearing TypeMaglev
Air Flow1-5 CFM
Noise Level15 - 20 dBA
Power Connector2 wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions30*10mm

Questions about this item

What does the 15 to 20 dBA noise level mean once the fan is installed in a CPU cooler?

At that range the fan is barely audible inside a closed case, so it will not raise the overall system noise floor when mounted on a small heatsink.

The fan uses a two-wire power connector — what control standard does that limit in practice?

Two wires provide only fixed 12 V supply with no PWM or voltage-control signal, so speed cannot be regulated by the motherboard.

Will the 30 mm by 10 mm frame fit the mounting holes on my existing CPU cooler?

The square 30 mm frame matches coolers designed for 30 mm fans; verify your cooler uses the same hole spacing before ordering.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.