We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black square 30mm maglev case fan with two wires

Zyvpee

Zyvpee HA30101V3-0000-A99 30mm Maglev case fan

SKU CH-D2XN-X8X3M

A 30 mm maglev fan for CPU coolers running at up to 1600 RPM on 12 V power

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Fan Size30mm
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Pin
  • Maglev bearing reduces friction for quiet operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 12 V 0.44 W draw keeps power use low
  • Two-pin connector simplifies motherboard hook-up
  • Non-LED black finish avoids unwanted light spill

30mm Maglev CPU Cooler Fan

The Zyvpee HA30101V3-0000-A99 is a 30mm square cooling fan designed for CPU coolers and other tight spaces. It uses a maglev bearing and runs at up to 1600 RPM while drawing 0.44W from a 12V supply. The two-wire connector provides power only. It has a black frame with no LED lighting.

Compact 12V Fan for Restricted Builds

This fan suits builders fitting a cooler into a small-form-factor chassis or replacing a 30mm unit on an existing heatsink. The 30mm by 10mm footprint fits where larger fans cannot. Buyers who need PWM speed control or a three-pin tachometer signal should look elsewhere. Anyone requiring higher airflow or a larger mounting pattern will need a different size.

Two-Pin 12V Power Connector

The only power interface is a two-pin header delivering 12V DC at 0.44W. No PWM wire and no speed-report wire are present, so the motherboard or controller cannot regulate or monitor RPM. Verify that your cooler or header accepts a two-pin 12V fan before ordering.

Highlights

  • Maglev bearing reduces friction for quiet operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 12 V 0.44 W draw keeps power use low
  • Two-pin connector simplifies motherboard hook-up
  • Non-LED black finish avoids unwanted light spill

Specifications

BrandZyvpee
SeriesHA30101V3-0000-A99
ModelHA30101V3-0000-A99
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Fan Size30mm
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesMini Cooling
Dimensions30*10MM

Questions about this item

Will the 30 mm frame and 2-pin connector fit the older CPU cooler I want to reuse?

The fan measures 30 mm square by 10 mm thick and uses a 2-pin power connector, matching coolers designed for that exact footprint.

How can I confirm the maglev bearing is running correctly once installed?

Listen for smooth, quiet rotation and verify the speed stays below 1600 RPM through BIOS or monitoring software.

Does the package include mounting screws or a 3-pin adapter, or must I buy them separately?

Only the 30 mm maglev fan with its two-wire lead is supplied; screws and any adapter are not included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.