We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black frameless VGA cooling fan with 4 pin connector

Zyvpee

Zyvpee GA91S2H PFTS 12V .35A 4 Pin VGA Cooling

SKU CH-ZZ1J-6JBA4

A 12 V 0.35 A four-pin VGA cooling fan with sleeve bearing and no LED lighting

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeSleeve bearing
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V power for stable graphics cooling
  • 35 A draw keeps energy use low
  • four-pin connector enables PWM speed control
  • sleeve bearing runs quietly at idle
  • frameless design fits tight GPU shrouds

Zyvpee GA91S2H PFTS 12V .35A 4 Pin VGA Cooling

This Zyvpee GA91S2H PFTS is a frameless VGA cooling fan designed for graphics card coolers that use a 4 pin connector. It suits builders replacing a worn fan on an existing heatsink or assembling a custom GPU cooling loop. Buyers needing a PWM-controlled blower or a larger frame for direct die contact should look elsewhere.

Thermals noise and power draw in normal use

The sleeve bearing and 12 V .35 A rating deliver steady airflow for typical GPU thermal loads without high current draw. DC operation means speed scales with voltage rather than a PWM signal, so acoustic output rises linearly with load. Systems requiring silent idle or software fan curves tied to PWM headers will not benefit from this design.

What the bundled accessories

No accessories, mounting hardware or control software are included with the fan. The bare unit assumes the host cooler already provides screw holes, retention clips and power routing. Installers must supply their own fasteners and verify pinout alignment before powering the card.

Highlights

  • 12 V power for stable graphics cooling
  • 35 A draw keeps energy use low
  • four-pin connector enables PWM speed control
  • sleeve bearing runs quietly at idle
  • frameless design fits tight GPU shrouds

Specifications

SeriesGA91S2H PFTS
ModelGA91S2H
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeSleeve bearing
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesDC frameless vga fan

Questions about this item

How is the GA91S2H PFTS fan installed in a graphics-card cooler and what step is often missed?

Remove the original fan, align the four mounting holes, connect the 4-pin header, then verify the PWM signal is active so speed control works.

What maintenance or replacement will the sleeve-bearing GA91S2H PFTS need later?

Sleeve bearings gradually lose lubrication; expect rising noise or reduced speed after extended use, at which point the fan should be swapped.

What limit appears first when the GA91S2H PFTS runs at 12 V and 0.35 A under sustained load?

The frameless DC motor reaches its thermal ceiling, forcing the controller to lower RPM to keep the sleeve bearing within safe temperature.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.