Zyvpee
Zyvpee FFB1424SHG 140x51mm 24V 2.3A 4-Pin PWM case fan
A 140 mm PWM case fan with 51 mm thickness, 24 V power and 2.3 A current draw for server or inverter cooling
- TypeCase Fan
- CompatibilityCase
- Fan Size140mm
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- 24 V operation suits server and inverter installations
- 140 mm by 51 mm frame fits deep-profile chassis
- 3 A draw delivers strong airflow at 24 V
- 4-pin PWM header enables precise speed control
- Non-LED black design keeps builds clean and professional
Delta FFB1424SHG 140mm server fan
This 140mm axial fan is built for server chassis and inverter cooling where 24V DC power is standard. Its 4-pin PWM connector allows the motherboard or fan controller to regulate speed automatically. The 51mm frame depth suits equipment bays that require a thicker profile than typical desktop fans. It targets integrators maintaining or populating rackmount hardware.
Fits 140mm mounts with 51mm clearance
The square frame matches standard 140mm mounting holes while the deeper body occupies more internal depth than slim models. Four-wire PWM control frees the builder from manual voltage adjustments and enables fan curves tied to component temperatures. No LED lighting keeps the unit suitable for professional environments where visual distraction is unwanted. Verify that your chassis can accommodate the 51mm thickness before installation.
24V 2.3A PWM thermal profile
At the rated 24V input the fan draws 2.3A, delivering high static pressure for restricted airflow paths such as dense heatsinks or filter meshes. PWM operation reduces acoustic output during low-load periods by lowering RPM without losing speed feedback. The DC axial design focuses on directed airflow rather than broad dispersion, matching server thermal management requirements. Ensure the power source can supply the rated current continuously.
Highlights
- 24 V operation suits server and inverter installations
- 140 mm by 51 mm frame fits deep-profile chassis
- 3 A draw delivers strong airflow at 24 V
- 4-pin PWM header enables precise speed control
- Non-LED black design keeps builds clean and professional
Specifications
| Series | FFB1424SHG |
|---|---|
| Model | FFB1424SHG |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 140mm |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 140*51mm |
Questions about this item
How much current does the 24 V 2.3 A motor draw under continuous load?
The motor is rated at 2.3 A at 24 V, so sustained operation will pull that full current.
What noise and heat should I expect when the fan runs 24/7 at full PWM duty?
The 140 mm × 51 mm frame moves high airflow at full speed, producing noticeable noise and exhaust heat typical of server-grade axial fans.
Which power source must I already have to run this 4-pin PWM fan?
A 24 V DC supply or header capable of delivering 2.3 A on the 4-pin PWM connector is required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114537BTC
In stock
