We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 40 by 28 millimetre case fan with three wire connector

Zyvpee

Zyvpee FFB0412SHN 40x28mm 12V 0.6A 3-pin case fan

SKU CH-8WFS-B6Q4K

A 40×28 mm 12 V 0.6 A ball-bearing case fan with a three-pin connector for CPU cooler use

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 40×28 mm frame fits tight CPU coolers
  • Ball bearing runs quietly at 12 V 0.6 A
  • Three-pin connector enables simple motherboard control
  • Non-LED black design keeps builds clean and professional
  • DC motor delivers steady airflow for small-form-factor systems

40 mm Ball-Bearing Case Fan

The Zyvpee FFB0412SHN is a 40 by 28 mm DC case fan built for CPU cooler mounts. It runs on 12 V and draws 0.6 A through a standard three-pin connector. The black frame carries no LEDs, making it suited for builds that prefer a clean, non-illuminated look. Ball-bearing construction targets longer service life in continuous operation.

Installation Notes

The three-pin plug fits any standard motherboard or fan-controller header keyed for 12 V DC fans. Because the frame is only 28 mm thick, verify that the mounting holes on your cooler or chassis match the 40 mm spacing before fitting. The ball bearing can produce a faint mechanical hum at full voltage; speed control via BIOS or software usually reduces this. No screws are included, so reuse the original fasteners from the cooler.

Pre-Purchase Checklist

Confirm that the target cooler or case accepts a 40 by 28 mm fan with three-pin 12 V input. Check the available header type — some compact boards only provide four-pin PWM headers that may not voltage-control a three-pin device. Ensure the 0.6 A draw does not exceed the header’s rated current limit. Buyers needing RGB lighting, larger airflow, or PWM speed signalling should look at other models.

Highlights

  • Compact 40×28 mm frame fits tight CPU coolers
  • Ball bearing runs quietly at 12 V 0.6 A
  • Three-pin connector enables simple motherboard control
  • Non-LED black design keeps builds clean and professional
  • DC motor delivers steady airflow for small-form-factor systems

Specifications

BrandZyvpee
SeriesFFB0412SHN
ModelFFB0412SHN
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Case Fan
Dimensions40*28mm

Questions about this item

How can I confirm the FFB0412SHN is running correctly after installation?

The fan should spin steadily when the system powers on; with its 3-pin connector the motherboard can report the RPM so you can verify it matches the expected speed for a 12 V 0.6 A ball-bearing unit.

What comes with the FFB0412SHN and what must I source separately?

The package contains the 40×28 mm black case fan with a 3-pin power lead; you will need a compatible 3-pin header on the motherboard or a fan controller, plus any mounting screws required by your chassis.

Which version of the FFB0412SHN should I choose for a CPU cooler?

The listed model FFB0412SHN F00 is a single 12 V 0.6 A ball-bearing variant in 40×28 mm size, so select this exact part when the cooler calls for those specifications.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.