Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.00086162BTC
In stock
Zyvpee
Zyvpee FD127010MB 70*10MM 3 Pin 12V .22A case fan
70 mm ball-bearing case fan runs on 12 V DC at 0.22 A with a 3-pin connector
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Ball bearing reduces friction for longer life
- 12 V DC motor draws 0.22 A for efficient cooling
- 70 mm frame fits tight chassis spaces
- 15 mm slim profile clears low-profile coolers
- Three-pin connector enables speed monitoring
Zyvpee 70 mm DC Case Fan
This Zyvpee FD127010MB is a 70 mm square DC axial fan built for case ventilation. It runs on 12 V, draws 0.22 A and connects through a standard three-pin header. The ball bearing and black non-LED frame suit general cooling duties.
Suits builds with 70 mm mounting points
Builders needing a 70 mm three-pin DC fan for case or CPU cooler mounting will find this unit fits. Systems that require PWM speed control or a different mounting pattern should look elsewhere.
12 V 0.22 A three-pin power draw
The single specification that decides fit is the 12 V 0.22 A three-pin power requirement; the motherboard or controller must supply that exact voltage and connector type.
Highlights
- Ball bearing reduces friction for longer life
- 12 V DC motor draws 0.22 A for efficient cooling
- 70 mm frame fits tight chassis spaces
- 15 mm slim profile clears low-profile coolers
- Three-pin connector enables speed monitoring
Specifications
| Series | FD127010MB |
|---|---|
| Model | FD127010MB |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC axial fan |
| Dimensions | 70*70*15mm |
Questions about this item
What motherboard header do I need to plug in the 3‑pin 12 V .22 A connector?
A standard 3‑pin 12 V fan header on the motherboard or a compatible fan controller will power the FD127010MB.
Will the 70 mm frame fit in the same mounting holes as my old 70 mm fan?
Yes, the 70 mm square frame with 15 mm thickness matches the common 70 mm mounting pattern.
How can I confirm the ball‑bearing fan is spinning at the correct speed after installation?
Check the RPM reading in BIOS or a hardware‑monitoring utility; it should report a steady value for a 12 V DC axial fan.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00083801BTC
In stock
