We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60mm square case fan with 25mm depth and two-pin connector

Zyvpee

Zyvpee FD126025EB 6025 12V .42A 2 Pin 60mm Case Fan

SKU CH-F8ZQ-TQ59T

A 60 mm case fan with 2-ball bearing, 12 V 0.42 A draw and a 2-pin power connector for direct DC operation

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V operation draws just 0.42 A for low power draw
  • 60 × 25 mm frame fits tight 60 mm mounting points
  • dual ball bearing design extends service life
  • two-pin connector plugs straight into standard headers
  • non-LED black finish keeps builds clean and distraction-free

Zyvpee FD126025EB 60mm Case Fan

The Zyvpee FD126025EB is a 60mm case fan designed for compact computer chassis that require targeted airflow. It suits builders working with small form factor systems or those needing a replacement fan for specific mounting points. The unit operates on a standard 12V connection using a two-pin power connector. Its non-LED black frame keeps the appearance neutral inside any build.

Sustained operation with 2 Ball bearing

The fan uses a 2 Ball bearing type rated for continuous running at 12V and 0.42A draw. This bearing choice generally maintains consistent rotational stability over long periods compared to sleeve alternatives. The DC motor design delivers steady airflow without PWM speed curves or software control. Performance remains linear as long as voltage stays constant.

Straightforward two-pin mounting

Installation involves aligning the 60*25mm frame with standard 60mm screw holes and connecting the two-pin header to a motherboard or fan controller. The key step is verifying that the header supplies 12V DC power, as no voltage regulation is built into the fan. A common issue arises when builders expect speed reporting or control from the two-wire lead, which only provides power. Polarity must match the connector key to avoid damage.

Highlights

  • 12 V operation draws just 0.42 A for low power draw
  • 60 × 25 mm frame fits tight 60 mm mounting points
  • dual ball bearing design extends service life
  • two-pin connector plugs straight into standard headers
  • non-LED black finish keeps builds clean and distraction-free

Specifications

BrandZyvpee
SeriesFD126025EB
ModelFD126025EB
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC Case Fan
Dimensions60*25mm

Questions about this item

How much noise and heat does the 12V .42A 6025 fan produce when running continuously?

The 2-ball bearing FD126025EB draws 0.42 A at 12 V, so power draw stays low and heat output is minimal; ball bearings typically run quieter than sleeve types under constant load.

What connector must my motherboard or controller provide for this 2-pin 60 mm fan?

A standard 2-pin DC header is required; the fan has no PWM wire, so speed is controlled by varying the 12 V supply voltage.

Will the 60*25 mm FD126025EB fit alongside older 60 mm fans that use 3-pin headers?

Yes — the 60 mm frame and 25 mm thickness match legacy 6025 mounts, but the 2-pin plug means you lose RPM reporting unless your board reads speed via the two-wire sense method.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.