We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black square case fan, 50 by 10 mm, two wires

Zyvpee

Zyvpee FD125010-SD1 5010 12V 0.16A 2 Wires case fan

SKU CH-XSH2-KHKHA

Compact 50×10 mm case fan with ball bearing, 12 V and 0.16 A two-wire power

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector2 Wires
  • ColorBlack
  • LEDNon-LED
  • Dimensions50*10mm
  • Ball-bearing motor for long service life
  • 50 × 10 mm frame fits tight chassis spaces
  • 12 V 0.16 A draw keeps power use low
  • Two-wire power connector for simple installation
  • Non-LED black finish suits understated builds

Compact 50 mm case fan

The Zyvpee FD125010-SD1 is a 50 mm square frame fan with a 10 mm thickness. It runs on 12 V and draws 0.16 A through a two-wire power connector. The ball-bearing design targets builders who need a small, non-LED cooler for tight chassis spaces or legacy hardware bays.

Replaces worn 5010 ball-bearing units

This model matches the 50*10 mm footprint and 12 V 0.16 A rating of many older system fans. The jump is worth it when the original develops bearing noise or reduced airflow after long service. It is not for builders who need PWM speed control or higher static pressure for dense radiators.

Simple two-wire installation

The two-wire lead plugs directly into a standard 12 V header or molex adapter without extra cables. Polarity must be observed because the connector lacks a keyed shroud. The main issue is accidentally reversing the wires, which leaves the fan motionless but causes no damage.

Highlights

  • Ball-bearing motor for long service life
  • 50 × 10 mm frame fits tight chassis spaces
  • 12 V 0.16 A draw keeps power use low
  • Two-wire power connector for simple installation
  • Non-LED black finish suits understated builds

Specifications

BrandZyvpee
SeriesFD125010-SD1
ModelFD125010-SD1
TypeCase Fan
Bearing TypeBall
Power Connector2 Wires
ColorBlack
LEDNon-LED
Dimensions50*10mm

Questions about this item

What mounting hole spacing does the 5010 fan require?

The fan measures 50 mm square with a 10 mm thickness, so it fits standard 5010 mounting patterns.

How do I connect the two-wire lead to a motherboard header?

Plug the 2-wire connector onto a 12 V fan header; the fan draws 0.16 A at 12 V.

When should the ball-bearing fan be replaced?

Ball bearings typically last years; replace the unit if noise increases or airflow drops noticeably.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.