Zyvpee
Zyvpee FBL06A24M 60×25mm 24V .12A 2.88W 2-wire case fan
A 60×25 mm case fan with ball bearing, running on 24 V at 0.12 A for 2.88 W via a two-wire lead
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector2 wires
- ColorBlack
- LEDNon-LED
- Compact 60×25 mm frame fits tight chassis spaces
- 24 V .12 A motor draws only 2.88 W
- Ball bearing ensures durable, low-friction rotation
- Two-wire power connector simplifies installation
- Non-LED black design keeps builds clean and distraction-free
60 mm 24 V case fan for compact builds
The Zyvpee FBL06A24M is a 60 by 25 millimetre case fan that runs on 24 volts and draws 0.12 amps for 2.88 watts. It suits small-form-factor chassis or inverter cooling where a thin 60 mm frame fits and a 24 volt supply is available.
Two-wire connection with ball bearing
Only two power wires are supplied so speed control depends on voltage regulation from the host system. The ball bearing tolerates any mounting orientation but the lack of a tachometer wire means the motherboard cannot report fan speed.
24 volt 0.12 amp rating determines compatibility
The single specification that decides fit is the 24 V 0.12 A power rating; systems that provide only 12 V or require a three- or four-pin PWM header cannot drive this fan correctly.
Highlights
- Compact 60×25 mm frame fits tight chassis spaces
- 24 V .12 A motor draws only 2.88 W
- Ball bearing ensures durable, low-friction rotation
- Two-wire power connector simplifies installation
- Non-LED black design keeps builds clean and distraction-free
Specifications
| Series | FBL06A24M |
|---|---|
| Model | FBL06A24M |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 2 wires |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 60*60*25mm |
Questions about this item
How can I verify the fan is running correctly after wiring it to a 24 V supply?
Measure the current draw at the two wires; it should read about 0.12 A, confirming the 2.88 W rating and proper ball-bearing operation.
What comes in the package and what must I source separately?
The box contains only the 60 × 25 mm black case fan with its two bare leads; you will need to provide a 24 V power source and any connector or mounting screws you prefer.
Which capacity should I choose for a 60 mm case slot?
This single FBL06A24M model delivers 2.88 W at 24 V and fits the 60 × 25 mm form factor, so it is the correct choice for that slot.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



