Zyvpee
Zyvpee F7015B12HB 70mm 12V 0.3A 3 Wires case fan
A 70 mm case fan with ball bearing, 12 V power and a three-wire connector for CPU cooling
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Wires
- ColorBlack
- LEDNo
- FeaturesCPU Cooling
- 70 mm frame fits tight build spaces
- 12 V 0.3 A draw keeps power use low
- Ball bearing design extends operational life
- Three-wire connector enables speed monitoring
- 70 × 15 mm profile suits compact CPU cooling
70 mm ball-bearing case fan
The Zyvpee F7015B12HB is a 70 mm square frame fan designed for compact chassis or CPU cooler mounting. It operates on a 12 V supply drawing 0.3 A through a three-wire power connector. The black plastic housing contains no LED lighting.
Sustained load behaviour with ball bearing
Ball bearings maintain consistent rotational speed during continuous operation better than sleeve alternatives. The three-wire connection allows the motherboard to monitor RPM under prolonged thermal stress. No PWM control is present so voltage regulation determines the speed curve.
Verify mounting holes and header type
Confirm the chassis or heatsink accepts 70 mm hole spacing before ordering. Check that the motherboard or fan controller provides a three-pin 12 V header; a four-pin PWM header will run the fan at full speed only. Ensure 0.3 A current capacity per header is available.
Highlights
- 70 mm frame fits tight build spaces
- 12 V 0.3 A draw keeps power use low
- Ball bearing design extends operational life
- Three-wire connector enables speed monitoring
- 70 × 15 mm profile suits compact CPU cooling
Specifications
| Brand | 3ccooler.com |
|---|---|
| Series | F7015B12HB |
| Model | F7015B12HB |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Wires |
| Color | Black |
| LED | No |
| Features | CPU Cooling |
| Dimensions | 70*15mm |
Questions about this item
How much heat and noise does the 70 mm ball-bearing fan generate when running all day?
The ball bearing is built for continuous operation; at 12 V and 0.3 A it moves air steadily without the rattle that sleeve bearings develop over long runs.
What power header must my motherboard or controller provide for the 3-wire connector?
A standard 12 V three-pin header supplies the 0.3 A the fan needs; the third wire reports speed so the board can adjust voltage if it supports fan control.
Will the 70 x 15 mm frame fit the mounting holes on my older 70 mm CPU cooler?
Yes — the 70 mm square frame with 15 mm thickness matches the legacy 7015 mounting pattern used on many earlier coolers and cases.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114814BTC
In stock
