We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 60mm square case fan 10mm thick three-pin connector

Zyvpee

Zyvpee F6010T12MS 60mm 10mm 3-pin case fan

SKU CH-4M5X-SDRGH

A 60 mm sleeve-bearing case fan spinning below 1600 RPM with a 3-pin 12 V connector

  • TypeCase Fan
  • Bearing Typesleeve bearing
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 60 mm square frame fits tight spaces
  • 10 mm slim profile clears low-clearance builds
  • 12 V DC at 0.15 A keeps power draw low
  • 3-pin connector enables motherboard speed monitoring
  • Sleeve bearing spins under 1600 RPM for quiet airflow

Compact 60 mm case fan for tight builds

The Zyvpee F6010T12MS is a 60 mm square frame fan with a 10 mm thickness designed for small-form-factor chassis or CPU coolers where space is limited. It runs on 12 V DC drawing 0.15 A and connects via a standard three-pin power connector. The black non-LED housing keeps the appearance neutral for any build theme.

Sleeve bearing and three-pin control

A sleeve bearing keeps the rotor running smoothly at speeds below 1600 RPM while the three-pin header allows the motherboard to monitor speed and adjust voltage for quieter operation. The 60 mm by 10 mm footprint fits narrow mounting holes without blocking adjacent components or memory slots. No additional adapters or controllers are required for basic installation.

Steady airflow under continuous load

Under sustained load the fan maintains its rated speed ceiling without thermal throttling or bearing noise escalation. The low current draw of 0.15 A means minimal impact on the 12 V rail during long rendering or gaming sessions. Builders needing higher static pressure or PWM precision should consider alternative models.

Highlights

  • 60 mm square frame fits tight spaces
  • 10 mm slim profile clears low-clearance builds
  • 12 V DC at 0.15 A keeps power draw low
  • 3-pin connector enables motherboard speed monitoring
  • Sleeve bearing spins under 1600 RPM for quiet airflow

Specifications

Brand3ccooler.com
SeriesF6010T12MS
ModelF6010T12MS
TypeCase Fan
Bearing Typesleeve bearing
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
Dimensions60*10mm

Questions about this item

Does the 60 mm 10 mm sleeve bearing reach its RPM ceiling quickly under constant load?

The fan tops out below 1600 RPM, so sustained loads will hit that ceiling early.

How much noise and heat does the 12 V 0.15 A motor produce during all-day operation?

At 0.15 A the draw is low, and the sleeve bearing runs quietly at reduced speeds; airflow noise increases only near the maximum RPM.

Will the 3-pin connector plug straight into my motherboard header without an adapter?

Yes, the three-pin plug fits standard 3-pin fan headers directly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.