We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 40mm square case fan with 10mm depth and 2-pin connector

Zyvpee

Zyvpee EC4010M12S 40mm 12V 0.07A 2-pin case fan

SKU CH-0ZBS-RY6S1

Compact 40mm case fan with sleeve bearing runs under 1600 RPM at 12V 0.07A

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeSleeve
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • Compact 40 × 10 mm footprint fits tight spaces
  • 12 V 0.07 A draw keeps power use low
  • 2-pin connector enables simple motherboard hookup
  • Sleeve bearing runs under 1600 RPM for quiet operation
  • Non-LED black frame suits stealth builds

Zyvpee EC4010M12S 40mm case fan

The Zyvpee EC4010M12S is a 40mm square case fan designed for tight mounting points such as CPU cooler heatsinks or small-form-factor chassis. It runs on 12V power and draws 0.07A through a standard two-pin connector. The sleeve bearing keeps the mechanical design simple for basic airflow duties.

Upgrade from smaller or failed 40mm fans

This unit replaces an existing 40mm by 10mm fan that has become noisy or stopped spinning. The jump is worth it when the original fan used a similar two-pin header and the mounting holes match the 40mm spacing. It is not suited for builds that need PWM speed control or higher static pressure for dense radiators.

Low-speed airflow for confined spaces

At under 1600 RPM the fan delivers modest airflow adequate for chipset heatsinks, router enclosures or auxiliary cooling on a CPU tower. Headroom runs out in high-restriction scenarios such as thick radiators or multi-drive cages where greater static pressure is required. The non-LED black frame keeps the appearance neutral in any build.

Highlights

  • Compact 40 × 10 mm footprint fits tight spaces
  • 12 V 0.07 A draw keeps power use low
  • 2-pin connector enables simple motherboard hookup
  • Sleeve bearing runs under 1600 RPM for quiet operation
  • Non-LED black frame suits stealth builds

Specifications

BrandZyvpee
SeriesEC4010M12S
ModelEC4010M12S
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeSleeve
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
Featurescpu fan
Dimensions40 * 10mm
Package Contentsrefer to title

Questions about this item

Will the 40 mm by 10 mm frame fit my CPU cooler mounting holes?

The fan body is 40 mm square and 10 mm thick; check your cooler's hole spacing against that footprint before buying.

How do I connect the 2-pin plug without reversing polarity?

The two wires carry 12 V at 0.07 A; match the red wire to the header's 12 V pin and the black wire to ground, or the fan will not spin.

When should I plan to replace the sleeve-bearing fan?

Sleeve bearings typically last a few years at 1600 RPM; expect rising noise or slower spin as the lubricant dries, then swap in a new 40 mm unit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.