We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 100mm case fan with 3-wire connector and 2-ball bearing

Zyvpee

Zyvpee E1033H12B7AP-B6 100mm 3-wire case fan

SKU CH-GZ0K-2088Z

A 100 mm case fan with dual ball bearings and a three-wire 12 V connection for turbo cooling

  • TypeCase Fan
  • Fan Size100mm
  • Bearing Type2 Ball
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • 100 mm diameter moves more air per revolution
  • 2-ball bearing reduces friction for longer service life
  • 3-wire connector reports speed to the motherboard
  • 12 V 0.59 A draws modest power from standard headers
  • 97 × 33 mm frame fits tight 10 cm mounting slots

100 mm 3-wire case fan

The Zyvpee E1033H12B7AP-B6 is a 100 mm case fan built for system cooling. It runs on 12 V DC and draws 0.59 A through a 3-wire power connector. The frame measures 97 by 33 mm and uses a two-ball bearing for durability.

Suits builds needing a 100 mm 3-wire intake

This fan fits any chassis with a 100 mm mounting pattern and a 3-pin header. Builds that require PWM speed control via a 4-pin header cannot use the 3-wire connector. Buyers who need addressable lighting or a different frame thickness should look elsewhere.

3-wire power connector decides compatibility

The 3-wire connector supplies power and tachometer feedback but not PWM control. Motherboards with only 4-pin headers will run the fan at full speed unless voltage control is supported. Verify the header type before ordering.

Highlights

  • 100 mm diameter moves more air per revolution
  • 2-ball bearing reduces friction for longer service life
  • 3-wire connector reports speed to the motherboard
  • 12 V 0.59 A draws modest power from standard headers
  • 97 × 33 mm frame fits tight 10 cm mounting slots

Specifications

Brand3ccooler.com
SeriesE1033H12B7AP-B6
ModelE1033H12B7AP-B6
TypeCase Fan
Fan Size100mm
Bearing Type2 Ball
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesPower Cooling

Questions about this item

How much heat and noise does the 0.59 A current draw create during all-day use?

The fan draws 0.59 A at 12 V, which equals roughly 7 W of power. That level is typical for a 100 mm dual-ball-bearing cooler and runs warm but not hot; expect a moderate airflow hum rather than a loud whine.

What connector must my motherboard or fan controller provide for the 3-wire plug?

A standard three-pin 12 V header supplies power and a tachometer signal; no PWM pin is present, so speed is controlled by voltage.

Will the 97 × 33 mm frame line up with the 100 mm mounting holes on my existing chassis?

Yes — the 97 mm square body matches the common 100 mm hole pattern, so it bolts directly into the same cut-outs used by your current 100 mm fans.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.