We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 70 by 20 millimetre case fan with four pin connector

Zyvpee

Zyvpee DV07020B12U AS02 70*20mm 4 Pin case fan

SKU CH-MHNP-3XE67

A 70 mm case fan with a 4-pin connector, ball bearing and 12 V 0.7 A power draw

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing for reliable long-term operation
  • 4-pin PWM connector enables precise speed control
  • 12 V, 0.7 A rating delivers strong airflow in a compact frame
  • 70 × 20 mm size fits tight chassis spaces
  • Non-LED black design keeps builds clean and distraction-free

Zyvpee 70 mm 4-pin case fan

The Zyvpee DV07020B12U AS02 is a 70 by 20 millimetre case fan with a four-pin power connector and ball bearing. It runs on 12 volt DC power at 0.7 ampere and has no LED lighting. The black frame suits standard chassis mounting points.

Replaces worn 70 mm three-pin fans

Swapping a failed or noisy 70 mm three-pin unit for this four-pin model restores PWM speed control. The upgrade is worth it when the motherboard header supports four-pin regulation and the existing fan can no longer maintain target temperatures.

Simple four-screw installation

The fan mounts with four screws into any 70 millimetre cut-out and the keyed four-pin plug prevents reversed connection. Common issues arise when the header is set to voltage mode instead of PWM or when cable routing blocks the impeller.

Highlights

  • Ball bearing for reliable long-term operation
  • 4-pin PWM connector enables precise speed control
  • 12 V, 0.7 A rating delivers strong airflow in a compact frame
  • 70 × 20 mm size fits tight chassis spaces
  • Non-LED black design keeps builds clean and distraction-free

Specifications

BrandZyvpee
SeriesDV07020B12U
ModelDV07020B12U
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesDC CPU FAN
Dimensions70*20mm

Questions about this item

Will the 70*20mm frame fit my case's 70mm fan mount?

Yes, the 70mm square frame and 20mm thickness match standard 70mm mounting holes used on many compact cases and CPU coolers.

How do I connect the 4-pin connector so the motherboard controls speed correctly?

Plug the 4-pin plug into a 4-pin PWM header on the motherboard; the fourth wire carries the PWM signal that lets the board vary the 12V 0.7A fan speed automatically.

When should I expect to replace the ball-bearing fan?

Ball bearings typically run for years; replace the fan if you hear grinding, feel vibration, or notice the RPM dropping well below its normal range.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.