We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 120mm square case fan, 25mm thick, four-pin connector, no LEDs

Zyvpee

Zyvpee DS12025B12E -P039 120mm 4-pin case fan

SKU CH-2TKR-8FSP4

120 mm case fan with 4-pin PWM control, ball bearing and 1600–1999 RPM range

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM1600-1999 RPM
  • Power Connector4 Pin
  • ColorBlack
  • Ball-bearing reliability for long service life
  • 12 V 0.2 A draw keeps power use low
  • 4-pin PWM connector enables precise speed control
  • 1600-1999 RPM range delivers strong airflow
  • 120 mm × 25 mm frame fits standard case mounts

What this fan fits

The Zyvpee DS12025B12E is a 120mm case fan built for standard mounting points in PC chassis. It runs on 12V at .2A and uses a 4-pin connector for PWM control. The black, non-LED frame suits builders who want airflow without lighting.

Speed range decides cooling headroom

The motor spins between 1600 and 1999 RPM, setting the maximum airflow and noise ceiling. Ball bearings support that range over long duty cycles. If your thermal target needs higher static pressure or lower minimum speed, this spec range is the limiting factor.

Simple 4-pin install, watch the clearance

Four pins plug straight into a motherboard or fan hub header; no adapter is required. The 25mm thickness fits most 120mm bays, but tight radiator stacks or slim cases can foul the frame. Verify depth before mounting.

Highlights

  • Ball-bearing reliability for long service life
  • 12 V 0.2 A draw keeps power use low
  • 4-pin PWM connector enables precise speed control
  • 1600-1999 RPM range delivers strong airflow
  • 120 mm × 25 mm frame fits standard case mounts

Specifications

BrandZyvpee
SeriesDS12025
ModelDS12025B12E
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM1600-1999 RPM
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions120 * 25mm
Package Contentsrefer to title

Questions about this item

What does the 1600-1999 RPM range mean for airflow inside a case?

The fan spins between 1600 and 1999 revolutions per minute, moving a moderate volume of air through a 120mm frame for standard case cooling.

How does the 4-pin connector control the fan speed?

The 4-pin PWM header lets the motherboard adjust speed precisely between 1600 and 1999 RPM based on temperature curves.

Will the 120 by 25 mm frame fit my case mount?

It matches the common 120mm square mounting pattern with a 25mm thickness, so it fits most standard case fan slots.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.