We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80mm square case fan with 4-pin connector

Zyvpee

Zyvpee DS08025B12U 80mm 4-pin case fan

SKU CH-GXEX-2GKTX

80 mm case fan with dual ball bearing, 4-pin PWM control and 12 V 0.7 A rating

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector4 Pin
  • ColorBlack
  • LEDBlack
  • 4-pin PWM control enables precise speed adjustment
  • 2-ball bearing design extends operational lifespan
  • 12 V 0.7 A rating delivers efficient cooling power
  • 80 × 80 × 25 mm footprint fits standard case mounts
  • DC square cooler frame directs airflow effectively

80 mm 4-pin case fan for compact builds

The Zyvpee DS08025B12U is an 80 mm case fan designed for systems that need focused airflow in tight spaces. It suits builders upgrading small-form-factor chassis or replacing a worn cooler in an existing 80 mm mount. The four-pin connector allows the motherboard to regulate speed based on temperature.

Dual-ball bearing and square frame for secure

The fan uses a 2 Ball bearing for consistent rotation over long operating periods. Its black square frame measures 80 by 80 by 25 mm and matches standard 8025 mounting holes. A 4-wire PWM lead carries power and speed control without extra adapters.

Check 80 mm clearance

Verify that your case has an 80 mm mounting grid and at least 25 mm depth for the frame. The motherboard must provide a 4-pin PWM header; a 3-pin header will run the fan but without speed control. The unit draws 0.7 A at 12 V, so confirm the header can supply that current.

Highlights

  • 4-pin PWM control enables precise speed adjustment
  • 2-ball bearing design extends operational lifespan
  • 12 V 0.7 A rating delivers efficient cooling power
  • 80 × 80 × 25 mm footprint fits standard case mounts
  • DC square cooler frame directs airflow effectively

Specifications

SeriesDS08025B12U
ModelDS08025B12U
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector4 Pin
ColorBlack
LEDBlack
FeaturesDC square Cooler
Dimensions80*80*25mm

Questions about this item

What does the 4-pin connector on the DS08025B12U control?

The 4-pin connector carries 12 V DC power at .7 A and adds a PWM wire so the motherboard can vary the fan speed automatically.

Will the 80 mm by 25 mm frame fit my case fan slot?

The fan measures 80 mm square and 25 mm thick, matching the standard 8025 mounting pattern used on most 80 mm case openings.

How do I install the DS08025B12U and what step is often missed?

Screw the fan into the four corner holes, plug the 4-pin header into the motherboard, then set the fan curve in BIOS so the PWM signal actually controls the speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.