We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80mm square case fan 25mm thick with four pin connector

Zyvpee

Zyvpee DS08025B12H P171 80mm 4 Pin case fan

SKU CH-WY6B-X9270

An 80 mm ball-bearing case fan with a 4-pin connector for PWM speed control

  • TypeCPU Cooler Fan
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNo
  • FeaturesCPU Cooling
  • PWM control via 4-pin connector for precise speed regulation
  • Ball bearing ensures long operational life
  • 80 mm frame fits compact chassis and CPU coolers
  • 12 V 0.3 A rating keeps power draw low
  • 25 mm thickness suits standard mounting points

Compact 80 mm PWM case fan

The Zyvpee DS08025B12H P171 is an 80 mm square frame fan with a 25 mm thickness designed for CPU cooling in tight chassis. Its four-pin connector enables PWM speed control so the motherboard can adjust airflow to match thermal load. The black housing carries no LED lighting, keeping the look neutral for any build. Ball-bearing construction targets durability in continuous operation.

Thermals and power draw

Rated at 12 V and 0.3 A, the fan draws modest power while spinning under motherboard control. PWM regulation lets the speed drop to a low idle level when the CPU is cool, reducing audible noise during light workloads. Under load the fan ramps up to move more air through a heatsink without exceeding the stated voltage and current envelope. The ball bearing maintains consistent rotation characteristics across the speed range.

What the four-pin connector changes

The 4-pin PWM header allows the system to command precise speed curves instead of running at a fixed voltage. This means quieter operation at idle and automatic response to temperature spikes without manual fan curves. No software suite or RGB controller is bundled; the fan relies entirely on standard motherboard fan headers for configuration. Builders who need RGB illumination or a three-pin voltage-only header will need a different model.

Highlights

  • PWM control via 4-pin connector for precise speed regulation
  • Ball bearing ensures long operational life
  • 80 mm frame fits compact chassis and CPU coolers
  • 12 V 0.3 A rating keeps power draw low
  • 25 mm thickness suits standard mounting points

Specifications

Brand3ccooler.com
SeriesDS08025B12H P171
ModelDS08025B12H
TypeCPU Cooler Fan
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNo
FeaturesCPU Cooling
Dimensions80*25mm

Questions about this item

How do I install the Zyvpee DS08025B12H 80mm fan and what step do people often miss?

Mount the 80*25mm frame with four screws, then plug the 4 Pin connector into the motherboard header; the step often missed is seating the PWM wire so speed control works.

What maintenance or replacement will the DS08025B12H P171 need later?

The Ball bearing design runs without lubrication; expect to replace the unit only if noise rises or airflow drops after extended use.

What limit appears first on the DS08025B12H under sustained load?

At DC12V 0.3A the motor draws constant current, so the thermal ceiling of the Ball bearing assembly is the first constraint during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.