We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 40mm square case fan with 3-pin connector

Zyvpee

Zyvpee DS04010S12L -013 40mm 10mm 12V .08A 3-pin case fan

SKU CH-PAPP-1GGZD

A 40 mm by 10 mm sleeve-bearing case fan running at up to 1600 RPM on 12 V with a three-pin connector

  • TypeCPU Cooler Fan
  • Bearing TypeSleeve Bearing
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 40 mm frame fits tight spaces
  • 12 V operation draws only 0.08 A
  • Three-pin connector enables speed monitoring
  • Sleeve bearing runs below 1600 RPM
  • Non-LED black design keeps builds clean

Compact 40 mm case fan

The Zyvpee DS04010S12L -013 is a 40 mm square, 10 mm thick DC fan that runs on 12 V and draws 0.08 A through a standard three-pin connector. Its sleeve bearing spins below 1600 RPM and the black frame carries no lighting, making it a plain replacement for tight chassis or router cooling.

Suits small-form-factor repairs.

This fan fits 4010 mounting holes in compact cases, home routers or legacy CPU coolers where a low-profile 12 V unit is specified. Builders who need higher static pressure, PWM speed control or a larger frame should look at something else because the three-pin header and sleeve bearing limit both airflow headroom and speed regulation.

Moves modest air for confined spaces

At under 1600 RPM the fan delivers enough flow for component-level cooling in a 40 mm envelope, such as voltage-regulator heatsinks or router enclosures. It runs out of capacity when tasked with case-wide ventilation or dense radiator stacks where greater pressure and volume are required.

Highlights

  • Compact 40 mm frame fits tight spaces
  • 12 V operation draws only 0.08 A
  • Three-pin connector enables speed monitoring
  • Sleeve bearing runs below 1600 RPM
  • Non-LED black design keeps builds clean

Specifications

Brand3ccooler.com
SeriesDS04010S12L -013
ModelDS04010S12L
TypeCPU Cooler Fan
Bearing TypeSleeve Bearing
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
Featuresrouter cooling
Dimensions40*10mm

Questions about this item

Will the 3-pin connector on the DS04010S12L -013 fan plug straight into a standard motherboard 3-pin header?

Yes, the fan uses a 3-pin power connector that fits a standard 3-pin motherboard header or a 4-pin header running in voltage-control mode.

Can the 40 mm by 10 mm frame replace an older 4010 sleeve-bearing fan without changing the mounting holes?

The 40 mm square frame with 10 mm thickness matches the 4010 form factor, so existing mounting holes line up for a direct swap.

How can I confirm the fan is spinning at its rated speed after installation?

Check the motherboard BIOS or a hardware-monitoring utility; the fan should report a speed below 1600 RPM when running at 12 V.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.