We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 40mm square case fan with two wires and no LED lighting

Zyvpee

Zyvpee DS04010S12L -003 40mm 4010 12V .08A 2-pin case fan

SKU CH-R6KQ-HYVYR

A 40 mm sleeve-bearing case fan running at up to 1600 RPM on 12 V DC with a two-pin connector

  • TypeCPU Cooler Fan
  • Bearing TypeSleeve Bearing
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 40 mm frame fits tight chassis spaces
  • Sleeve bearing keeps noise low at under 1600 RPM
  • 12 V 0.08 A draw minimises power load
  • Two-pin connector simplifies motherboard hook-up
  • Non-LED black design suits stealth builds

Compact 40 mm case fan

The Zyvpee DS04010S12L -003 is a 40 mm square frame fan with a 10 mm thickness designed for tight spaces in PC cases or networking gear. It runs on 12 V DC and draws 0.08 A through a simple two-pin power connector. The black sleeve-bearing unit has no LEDs and spins at under 1600 RPM.

12 V two-pin power connector

The fan uses a standard two-pin header supplying 12 V DC at 0.08 A, so it plugs directly into most motherboard or controller headers without PWM control. Voltage and connector type are the only electrical interface; there is no four-pin or Molex option in this model. Verify that your header matches before ordering.

Suits small-form-factor and router cooling

Builders fitting a 40 mm mount in a mini-ITX chassis, a home-router enclosure or a compact CPU cooler will find the dimensions and voltage a direct match. Buyers who need PWM speed control, higher static pressure or a larger frame should look at other form factors.

Highlights

  • Compact 40 mm frame fits tight chassis spaces
  • Sleeve bearing keeps noise low at under 1600 RPM
  • 12 V 0.08 A draw minimises power load
  • Two-pin connector simplifies motherboard hook-up
  • Non-LED black design suits stealth builds

Specifications

Brand3ccooler.com
SeriesDS04010S12L -003
ModelDS04010S12L
TypeCPU Cooler Fan
Bearing TypeSleeve Bearing
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesRouter Cooling
Dimensions40*10mm

Questions about this item

What does the sub-1600 RPM figure mean for actual airflow in a tight chassis?

At under 1600 RPM the 40 mm sleeve-bearing fan moves a modest air volume suited to spot-cooling a router board or small heatsink rather than high-static-pressure case airflow.

How does the 2-pin 12 V 0.08 A connector limit speed control options?

The two-pin header supplies fixed 12 V power so the fan runs at its rated speed; voltage regulation or PWM control is not possible without an external controller.

What physical clearance does the 40 x 10 mm frame need to mount?

The fan occupies a 40 mm square footprint and 10 mm depth, so the mounting surface must provide at least that much flat area with two screw holes on 4010 centres.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.