We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black square 25mm frame 10mm thick two-wire 2-pin connector

Zyvpee

Zyvpee DFS251012H 25mm 12V 1.5W case fan

SKU CH-YXMA-9YR0H

25 mm square frame holds a 12 V 1.5 W ball-bearing fan with two-pin power for compact cooling

  • Fan Size25mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Dimensions25*10mm
  • Compact 25 mm square frame fits tight spaces
  • 12 V 1.5 W draw keeps power use low
  • Ball bearing design extends operating life
  • Two-pin connector simplifies installation
  • Non-LED black finish stays discreet inside builds

25 mm 12 V compact case fan

The Zyvpee DFS251012H is a 25 mm square frame fan that is 10 mm thick and runs on 12 V DC power. It draws 1.5 W through a two-pin connector and uses a ball bearing for rotation. The non-LED black housing suits small enclosures such as routers or tight PC builds.

Replaces slim 25 mm two-pin fans

This unit fits the same 2510 footprint as other 25 mm fans with a two-wire 12 V connection. The jump is worth it when the original fan has failed, become noisy or uses a sleeve bearing that has worn out. Ball bearing operation gives longer service life in continuous-use devices.

Check mounting holes and voltage before ordering

Verify that your device accepts a 25 mm square frame with 10 mm depth and a two-pin 12 V header. Confirm the screw pattern matches the 2510 layout shown in the photos. The fan has no speed-control wire so it will run at full speed whenever powered.

Highlights

  • Compact 25 mm square frame fits tight spaces
  • 12 V 1.5 W draw keeps power use low
  • Ball bearing design extends operating life
  • Two-pin connector simplifies installation
  • Non-LED black finish stays discreet inside builds

Specifications

Brand3ccooler.com
SeriesDFS251012H
ModelDFS251012H
Fan Size25mm
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
Dimensions25*10mm

Questions about this item

Will the 25mm x 25mm x 10mm frame fit my router's fan slot?

The fan measures 25mm square and 10mm thick, so it matches any 2510 mounting pattern.

How do I connect the 2-pin 12V power lead correctly?

Plug the two-wire connector onto the 12V header with the red wire to positive and black to ground; reversing them will prevent the fan from spinning.

When should I plan to replace the ball-bearing fan?

Ball bearings typically run for years; replace the unit if noise increases or airflow drops noticeably.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.