We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80 by 25 millimetre case fan with two-pin connector

Zyvpee

Zyvpee DFB802512H 80x25mm 12V 2-pin case fan

SKU CH-VJKS-NCFS3

80 mm sleeve-bearing case fan runs at 3000-3499 RPM with 25-30 dBA noise on a 12 V 2-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeSleeve bearing
  • RPM3000-3499 RPM
  • Air FlowVariable
  • Noise Level25 - 30 dBA
  • Quiet operation at 25-30 dBA for low noise
  • Efficient cooling with 3000-3499 RPM speed range
  • Low power draw of 2.0 W at 12 V
  • Compact 80x25mm size fits tight spaces
  • Simple 2-pin connector for easy installation

80 mm 12 V sleeve-bearing case fan

The Zyvpee DFB802512H is an 80 mm square frame fan designed for standard case mounting points. It runs on a 12 V DC supply and draws 2.0 W through a two-pin connector. The black, non-LED housing suits builds that prefer a subtle look.

Two-pin DC power fits basic headers

The two-wire, two-pin plug connects directly to any 12 V DC fan header on a motherboard or fan controller. No PWM signal wire is present, so speed is managed by varying the supply voltage. The 25 mm thickness clears most tight side-panel or drive-cage locations.

3000-3499 RPM with 25-30 dBA output

At full voltage the fan spins between 3000 and 3499 RPM while producing a noise level of 25 to 30 dBA. The sleeve bearing keeps running noise low during typical operation. Power draw remains at the rated 2.0 W under normal load.

Highlights

  • Quiet operation at 25-30 dBA for low noise
  • Efficient cooling with 3000-3499 RPM speed range
  • Low power draw of 2.0 W at 12 V
  • Compact 80x25mm size fits tight spaces
  • Simple 2-pin connector for easy installation

Specifications

SeriesDFB802512H
ModelDFB802512H
TypeCase Fan
CompatibilityCase
Bearing TypeSleeve bearing
RPM3000-3499 RPM
Air FlowVariable
Noise Level25 - 30 dBA
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*25mm

Questions about this item

How long will the sleeve bearing last when the fan runs at 3499 RPM continuously?

Sleeve bearings typically wear faster than ball bearings at sustained high speeds, so expect a shorter lifespan under constant 3499 RPM operation.

What noise and heat should I expect from the 2.0 W motor after hours of use?

The fan stays between 25 and 30 dBA, and the 2.0 W draw keeps heat output low even during all-day operation.

Does my case need a specific 2-pin header for this 80 mm fan?

Yes, it requires a standard 2-pin 12 V fan header on the motherboard or controller.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.