We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black square 40x10mm case fan with three-pin connector

Zyvpee

Zyvpee DFB401012M 40x10mm 12V 3 Pin case fan

SKU CH-C4W1-819KQ

A 40×10 mm 12 V ball-bearing case fan spinning under 1600 RPM with a 3-pin connector for compact cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Compact 40×10 mm frame fits tight drive bays
  • Ball bearing withstands continuous 12 V operation
  • Low 0.7 W draw keeps system power budget low
  • Sub-1600 RPM speed limits acoustic output
  • Three-pin DC connector enables motherboard speed control

Compact 40mm case fan

The Zyvpee DFB401012M is a 40x10mm case fan that runs on 12V through a three-pin connector. It uses a ball bearing and spins below 1600 RPM while drawing .7W. The frame is black with no LED lighting.

Suits tight spaces and basic cooling

Builders fitting a fan into a 40mm mount for component-level airflow will find this unit matches the cut-out and voltage. Systems that need PWM control, higher static pressure, or a larger frame format should look elsewhere.

Three-pin 12V power connector

The fan connects via a standard three-pin header supplying 12V. This single interface detail determines whether the motherboard or controller can drive the fan at its rated speed.

Highlights

  • Compact 40×10 mm frame fits tight drive bays
  • Ball bearing withstands continuous 12 V operation
  • Low 0.7 W draw keeps system power budget low
  • Sub-1600 RPM speed limits acoustic output
  • Three-pin DC connector enables motherboard speed control

Specifications

BrandZyvpee
SeriesDFB401012M
ModelDFB401012M
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions40*40*10mm
Package Contentsrefer to title

Questions about this item

What power header does the 3-pin connector on this fan need to plug into?

The fan uses a standard three-pin connector that plugs directly into a 12 V fan header on the motherboard or a compatible fan controller.

Will the 40 mm frame and 10 mm depth leave enough clearance for other components in a tight build?

At 40 mm square and 10 mm thick the fan fits in compact drive cages and small-form-factor cases where larger fans cannot be mounted.

How can I confirm the fan is spinning at the expected speed after installation?

With a rated speed below 1600 RPM you should see a corresponding RPM reading in the BIOS hardware monitor or fan-control software once the system boots.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.