We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 70 by 15 millimetre case fan with three-pin connector

Zyvpee

Zyvpee DE07015B12L -123 70x15mm 3-pin case fan

SKU CH-6YYC-6EW50

A 70 mm square case fan with dual-ball bearings, 12 V operation and a three-pin connector

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesDC square Cooler
  • Dual ball bearings extend operational lifespan
  • 12 V DC at 0.3 A for efficient power draw
  • 70 mm square frame fits standard 7 cm mounts
  • 15 mm slim profile suits tight chassis spaces
  • Three-pin connector enables motherboard speed monitoring

Compact 70 mm case fan for tight builds

This Zyvpee DE07015B12L -123 measures 70 by 70 by 15 mm and runs on 12 V DC at .3 A. The 3-pin connector provides standard voltage control for motherboards or fan controllers. It suits small-form-factor cases, HTPC chassis or any spot where a 70 mm frame is the largest that fits.

Dual-ball bearing keeps speed steady under

The 2-ball bearing design maintains consistent rotation during long sessions without the wear pattern of sleeve alternatives. DC square cooler construction moves air across heatsinks or through restricted channels without stalling. Expect stable airflow when the system stays under load for hours.

Verify 70 mm mounting holes

Your case or heatsink must accept a 70 mm fan with 7015 hole spacing. The board or controller needs a free 3-pin DC header; PWM-only headers will not regulate this model. No LED lighting is present, so the fan stays dark in windowed builds.

Highlights

  • Dual ball bearings extend operational lifespan
  • 12 V DC at 0.3 A for efficient power draw
  • 70 mm square frame fits standard 7 cm mounts
  • 15 mm slim profile suits tight chassis spaces
  • Three-pin connector enables motherboard speed monitoring

Specifications

SeriesDE07015B12L
ModelDE07015B12L -123
TypeCase Fan
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions70*70*15mm

Questions about this item

How much heat and noise does the 70×15 mm 2-ball-bearing fan add when it runs continuously at 12 V?

The fan draws 0.3 A at 12 V, so its steady-state power is low. The 2-ball bearing is rated for long continuous operation with minimal friction noise, and the 70 mm frame moves enough air for spot cooling without the turbulence of larger fans.

What must my system already have to plug in this 3-pin DC fan?

A standard 3-pin 12 V fan header on the motherboard or a 3-pin fan controller. The connector carries power, ground and a tachometer signal; no PWM header or separate molex adapter is required.

Will this 70 mm fan line up with the mounting holes on my older 70 mm chassis or heatsink?

Yes — the 70×70 mm square frame uses the industry-standard 70 mm hole spacing, so it fits legacy 70 mm case mounts and CPU coolers that were built for the same footprint.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.